Operating instructions

STUDER Innotec COMPACT
COMPACT V6.4 5/85
English description
1 General Information
1.1 Operating instructions
This manual is part of the delivery package of every COMPACT inverter-charger. It
serves as guidelines for safe and efficient operation of COMPACT. The instructions
are only valid for use with the following devices and options:
COMPACT C 1600-12
COMPACT C 2600-24
COMPACT C 4000-48
Temperature sensor CT-35 AC cable cover CFC-01
Remote Control RCC-01 IP23 cover C-IP23
Power sharing remote control RPS-01 Solar charge controller CxxxxS
Every person who installs a COMPACT and/or works with it must be fully familiar with
the content of this manual and must follow exactly all the warning and safety
instructions. Installation of or any work on the COMPACT must be carried out by a
skilled and trained personnel. Installation and application must comply with the
respective local installations codes and safety regulations.
1.2 Quality and Warranty
During production and assembling, all COMPACT appliances go through many
controls and tests. Production, controls and tests are carried out in accordance with
firm and established procedures. Every COMPACT has its own serial number, which
helps to refer back to its original data in the event of controls or repairs. That is why
you should never remove the identification plate showing the serial number. The
production assembly and tests on all COMPACT appliances are totally carried out in
our company in Sion, Switzerland. The warranty for these appliances is valid for uses
and operating possibilities mentioned in this manual.
The warranty period for the COMPACT is 2 years.
1.3 Warranty Disclaimer
We do not accept any liability for any damages occurring through use, manipulation,
working situation and handling, which are not explicitly mentioned in these operating
instructions.
Following cases are not covered by the warranty:
− High voltage at INPUT (i.e. 48V at the Battery INPUT of COMPACT 1600-12)
− Reverse polarity on Battery connections (+/- reversed)
− Running liquid or oxidation through condensation in the appliance
− Defects caused by force, physical or mechanical means
− Changes not explicitly authorized by STUDER INNOTEC
− Not or only partly tightened screws and nuts after change of fuses or cables
connecting
− Transport damage, i.e. through bad handling and /or packing
− Damage from atmospheric over voltage (lightning)