User manual

CompAir BroomWade Limited
page 58
1. FAULT INDICATIONS
1.1 Trip Fault Indications
Display Meaning
L1 to L8 Flashing Quickly Emergency Stop
L1 Flashing Quickly Excess Pressure
L1 Flashing Quickly,
Pressure Display shows (----) Pressure Sensor Failure
L2 Flashing Quickly Excess Temperature
L2 Flashing Quickly,
Temperature display shows (----) Temperature sensor failure
L6 Flashing Quickly Drive Motor Fault
Display shows ( ) Power Failure
FAULT FINDING
In operation the compressor is protected by circuits
which are triggered when a fault arises and either
cause the compressor to shut down or indicate that
a servicing action is required.
● Refer to the safety procedures before
carrying out any fault finding investigation
on the compressor unit.
● Lethal voltages are used in this equipment.
Use extreme caution when carrying out
electrical checks. Isolate the power supply
before starting any maintenance work.
WARNING
!
!