Wireless Access Point Fast Installation GuideWR5842 • Wi-Fi Network set up • Cable network set up 1
LAN Options +12V DC Power WPS Wireless LAN Wired Ethernet LAN 1 x WAN 2.
Inside the Box 1 WR5842 One Power Adapter 110V 3
Power Connection 2 Plug the power Adapter into an +110V AC power outlet and DC plug in the other end of the power cord into +12VDC inlet of WR5842. Turn the switch ON( - ), Every time WR5842 is turned on, it takes about 2 minutes to find and lock the Mesh Wi-Fi.
Wireless LAN Connection For Configuration Manager Access 3 Check the WR5842 label to find out the basic setting of Wireless Wi-Fi SSID and password. Check the WR5842 LED status. The WR5842 front panel LED indicators provide the status information for power, communications, and errors. If WR5842 is power on and work function LED should be solid white.
Wireless LAN Connection For Configuration Manager Access 3 Go to the device you wish to connect. Open your device’s Wi-Fi settings (make sure Wi-Fi is turned on). Refresh the "Network and Internet" window to select and connect to the WR5842 SSID name printed on the label. CBN-XXXX Enter the password printed on the label and press "Next" for Wi-Fi connection. You can access the WR5842 configuration manager through http://192.168.200.1.
Wired Ethernet LAN Connection For Configuration Manager Access 4 User can easily connect any 10/100/1000 Mbps/ 2.5GbE (WAN/LAN selectable) Ethernet connection directly to the WR5842 Ethernet LAN port to access the configuration manager through http://192.168.200.1 2.
WR5842 Configuration Manager (CMGR) 5 The WR5842 Configuration Manager (CMGR) allows you to change and view the settings of your WR5842. You can reach the configuration manager at http://192.168.200.1 to login CMGR, you should key in the correct Password provided in Unit label.
Complete WR5842 Configuration Manager (CMGR) 6 After logging into the management system, CMGR allows you to change and view the settings on your WR5842. Congratulations! Your wireless access point has been set up. If you have any problem, please follow the troubleshooting instructions to troubleshoot.
Mesh setting 7 First make sure your cable modem is able to connect to the internet, press the cable modem and WR5842 WPS button at the same time, wait for 5-10 second to complete the Mesh network setting. If LED is solid green light, this means WR5842 is scanning and trying to connect to the Mesh network.
Front Panel LED Behavior The WR5842 front panel LED indicators provide the following status information for power, communications, and errors: LED Wifi Network Mesh Network Status Description On Off Flashing Device restart/ software upgrading/ settings setup Green On Mesh network is connecting Yellow On Mesh Wi-Fi network is too close to the CAP Blue On Mesh Wi-Fi network distance properly Red On Mesh Wi-Fi network is too far from the CAP White Device is power-on Device is power-off 11
Troubleshoot If the device is not working properly, please check troubleshoot below. • Check electrical outlet is properly plugged into the WR5842 and the device is power on . • Check LED light status on the device is working properly. For more information check LED behavior. LED light is off • Check the WR5842 is properly plugged into the AC electrical wall outlet. If still not working, change another electrical outlet or make sure electrical outlet is work properly.
Safety Warning and Disclaimer 型號 (型式): WR5842 Type designation (Type) 設備名稱: 無線基地台 Equipment Name: Router 限用物質及其化學符號 Restricted substances and its chemical symbols 單元 Unit (Cd) 六價鉻 Hexavalent Chromium (Cr +6) 多溴聯苯 Poly-brominated Biphenyls (PBB) 多溴二苯醚 Poly-brominated Diphenyls Ethers (PBDE) O O O O O O O O O O O Case O O O O O O Package O O O O O O 鉛 Lead 汞 Mercury 鎘 Cadmium (Pb) (Hg) Power Adapter O PCB 備考 1. “超出 0.1 wt %” 及 “超出 0.01 wt %” 係指限用物質之百分比含量超出百分比含量基準值.
Safety Warning and Disclaimer • • • Please avoid from contact with water or immersed in any liquid. Do not use this product in highly humid places, and do not touch the power plug with wet hands to avoid electric shock, fire, or malfunction of the product. This product is a high-efficiency communication device, suitable for home and office environment, please use this product within the working environment temperature range of 0°C ~ 40°C (32°F ~ 104°F).
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
