WR5881 Wireless Access Point Quick Installation Guide Release 1.0 Aug/2021 1 Copyright © 2021 Compal Broadband Networks, Inc.
Welcome 格式化: 字型: (英文)Calibri, 11 點 Thank you for choosing the CBN WR5881 whole home MESH Wi-Fi solution. The mesh Wi-Fi can be used to expand coverage of your existing CBN Wireless Network and without dead zone. This Quick Start Guide will get you up and running in no time.
格式化: 置中 Wireless Access Point Overview Front Panel The WR5881 front panel contains indicator light. 格式化: 字型: 11 點 3 Copyright © 2021 Compal Broadband Networks, Inc.
LED descriptions The WR5881 front panel LED indicators to provide the following status information for power, communications, Wi-FI, MESH and errors. This device consists of multiple leds which shows the status of all functions.
Rear Panel The WR5881 rear panel contains of LAN Ports, WAN Port, reset button, Power button, Power port and WPS Button on top. The WR5881 (shown above) rear panel contains the following cabling port and connectors: Item Description Power port Plugged into the AC adapter and wall outlet. Power Button ON/OFF WR5881 device Reset Ethernet (LAN/WAN) Press and hold the RESET button for five seconds or longer to restore WR5881 to factory default settings.
WPS Button (Top) To use WPS feature press WPS button to start WPS directly 6 Copyright © 2021 Compal Broadband Networks, Inc.
Chassis Label 格式化: 字型: (英文)Calibri The WR5881 Chassis label is located on the bottom of the WR5881 devices. The label contains Web GUI login information and your Wi-Fi network name and password Wireless LAN connection SSID & Password Configuration Manager (CMGR) Login IP address User name & Password Connect Power Supply Plug the power cord into an AC wall outlet and the other end of the power cord into the power port of WR5881.
indicates that the startup process has been successfully completed. Wireless LAN Connection Go to the device you wish to connect. Open your device’s Wi-Fi settings (make sure Wi-Fi is turned on). Refresh the "Network and Internet" window to select and connect to the WR5881 SSID name printed on the bottom label. Enter the password printed on the bottom label and press "Next" for Wireless LAN connection. 8 Copyright © 2021 Compal Broadband Networks, Inc.
Wired Ethernet LAN Connection Users can easily connect any PC RJ45 Ethernet port directly to the WR5881 Ethernet port to establish a wired Ethernet LAN connection. WR5881 Configuration Manager (CMGR) Login The WR5881 Configuration Manager (CMGR) allows you to change and view the settings on your WR5881. You can reach the configuration manager at http://192.168.1.1 To login CMGR, you should key in the correct Password provided in MAC label. 9 Copyright © 2021 Compal Broadband Networks, Inc.
After login your CGMR looks like the below,it consists of Quick setup Wizard, Language, Operation Mode for Advanced settings. For more details refer user manual. If WR5881 cannot work normally, please follow the Troubleshooting Guidelines for troubleshooting. MESH network mode to Router or Bridge: When in Configuration Manager (CMGR) and you can change the MESH Mode: Menu > Wi-Fi Setting > Mesh Wi-Fi MESH mode: 1. Auto Detect: WR5881 will auto detect itself if its CAP or RE mode 2.
Router Mode Mesh Network Setting (CAP) First, make sure that your WR5881 connected with WAN and can access the Internet. Then log in Configuration Manager (CMGR) change The WR5881 to Router mode (CAP) Press the WPS button of the WR5881 and the Wi-Fi AP_1 WPS button at the same time or within a 60-second window, and then wait 5-10 seconds to complete the Mesh network settings. You will see Wi-FI LED is blinking blue, it means that the WR5881 is scanning and trying to connect to the mesh network.
Troubleshooting Guidelines When WR5881 cannot work normally, please follow the steps below to troubleshoot your device. If the troubleshooting guide does not solve the problem encountered, please contact your Internet service provider for further support. Before you go to your Internet service provider, please try to press and hold the "Reset" button on the rear panel for more than 5 seconds to restore the device back to the factory default settings.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
