User's Manual

Basic Operation
12
Caller Identification
The caller’s phone number, and name if stored in the Phonebook, will be
displayed during an incoming call.
Note: Caller Identification may not always be available.
Volume Control
The volume level may be adjusted during a call:
Use
to decrease the volume; use to increase the volume
Note: Volume control for the Personal Handsfree accessory is ad-
justed in the same manner.
Locking the Phone
With the Phone Lock enabled you will be restricted to answering incom-
ing calls only. The Phone Lock Code is factory set to 0000.
1 From Idle press
and select (Applications >) Phone Option
> Security > Phone Lock. Press
2 From the submenu select Status
3 Select On and press
4 Enter the 4-digit code and press
The lock icon will be displayed in the primary selection area.
Unlocking the Phone
Enter your Lock Code. The lock icon will be replaced by OK. Press
to confirm.
As long as the Phone Lock is enabled, whenever you turn on the phone,
the Lock Code will need to be re-entered to activate the code.