User's Manual

PND VMN X-980T Manual / QuickStart V 1.0 Page - 8 / 12
This document is the exclusive property of ViaMichelin. Any reproduction and/or dissemination is strictly forbidden
N ot e :
Traffic Information is available in: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Italy, the Netherlands, Norway, Spain, Sweden, Switzerland and the
United Kingdom.
In France, you can access ViaMichelin Traffic, an exclusive service provided by
ViaMichelin.
Useful inform at ion
The SD card provided contains maps of Europe and the ViaMichelin Navigation
software. This card also contains the necessary data to activate the DVD-ROM
provided. Be careful not to damage the SD card before activating your DVD-ROM, as
you will not be able to retrieve data from the SD card in order to activate the DVD-
ROM. We recommend activating the DVD-ROM as soon as possible.
N ot e :
Activating the DVD-ROM requires an Internet connection.
N ot e :
Registering your product is not compulsory. Your product is provided with a "Plug &
Drive" SD card which can be used immediately with no other requirements.
Nonetheless, registering your product will allow you to:
- activate the DVD-ROM provided if required. Activating the DVD-ROM is highly
recommended because you will need to use the DVD-ROM in order to reformat your
SD card if it becomes corrupted
- automatically set up your "My ViaMichelin" account. Registering for a "My
ViaMichelin" account will also allow you to receive the ViaMichelin newsletter (if you
wish), and take advantage of special promotional offers on ViaMichelin products as
well as exclusive privileges reserved for "My ViaMichelin" subscribers on the
www.ViaMichelin.com website.
For m ore inform ation on activat ing t he DVD- ROM, please refer to t he com prehensive
version of t he ViaMichelin Navigat ion X-980T user m anual, available in PDF form at,
from our websit e: www.ViaMichelin.com / GPSnavigat ion) .
 Per for m ing a soft rese t or a hard r eset
▫
A soft r eset allows you to restart your ViaMichelin Navigation X-980T in the event
of any application failure.
To do this, use the stylus to press into the small hole marked “Re se t ” on the back
of your ViaMichelin Navigation X-980T. The soft reset will close down the
application and restart your ViaMichelin Navigation.
N ot e :
Only the data which was running at the time may be lost (for example, the route
navigation in progress).
▫
A har d r eset allows you to reset your product back to its original settings.
Following the hard reset, you will have to re-install the software.