User Manual

19 Phone (M1)
☛ Enter the emergency number 112 and the
confirmation screen is displayed.
☛ Press SK1 (YES) to make an emergency call or SK2
(NO) to cancel a call.
, The screen below is displayed until you enter the
designated emergency number correctly.
When the Dial lock or Auto lock is turned on,
☛ Enter the emergency number 112 and the emergency
call screen is displayed.
☛ Press SK1 (SEND) or the Enter key to make an
emergency call, or SK2 (CANCEL) to cancel a call.
☛ Besides 112 input, pressing SK2 (EMRGCY) and SK1
(YES) is also available on the Home screen.
For speed call
☛
Enter a contact memory number from 2 to 99 and
press to call the phone number registered for the
memory number in the main unit (not the USIM card).
☛ To turn on/off the speed dial function, press to
select Settings, Calls, Advanced settings, and then
select Speed dial.
2If more than one phone number is registered for a
memory number, the first number is used to make
a call.
2See the Calls (M83) (page 50) section in Settings
(M8) for details.
For one touch dial
☛
Pressing and holding a key from 2 to 9 calls the
number registered in the One touch dial list.
☛ To register or edit the number in the One touch dial
list, press to select 5 (Contacts), 7 (Settings),
and 1 (One touch dial). You can register phone
numbers to 2 to 9 in the list. Voicemail number is
preset as 1 and cannot be moved or deleted.
For pause dial
☛
Enter the phone number, then press and hold # to
insert a pause (displayed as P).
☛ Input the numbers to call, inserting pauses where
necessary. Press to dial the input numbers. When
the other party answers the call, the next number is
automatically dialed in 3 seconds. Then, all
succeeding numbers are automatically dialed every 3
seconds.
Receiving a Voice Call
☛ Press or SK1 (ANSWER) when you receive a
voice call.
2You can also answer a call by pressing Options
and 1 (Answer call) when receiving a voice call
2When Any key answer function is activated, you
can press any key to answer the call except SK2
(IGNORE), , i-mode () key, Up or Down key
(including the side key), the key, and
Options. (See the section of Calls (M83)
(page 50); Any key answer: (page 50) for details.)
2When Active flip function is activated, you can
answer the call only by opening your 804N. (See
the section of Calls (M83); Active flip: (page 50)
for details.)
2When the Calling Line Identification (CLI) function
has been activated by the caller, the registered
image is displayed. (See the section of Calls
(M83); Portrait Display: (page 52) for details.)
2When the headset is connected, pressing the
headset switch also answers the call.
To reject the call
☛
Press , SK2 (IGNORE) or 2 (Ignore call) in the
Options menu while receiving a call.