User's Manual

?Enable Wireless LAN Indicator: If you check this, the wireless LAN
indicator is displayed in the navigation bar.
?Transmission Rate: Select transmission rate to be used from the
pulldown
menu. If you select "Fully Auto", the adapter is automatically set
to the most suitable transmission rate.
?Channel: If you make a ad-hoc network, you can select a channel that
used in that ad-hoc network from this list.
?Enable Power Saving Mode: Check this to use power saving mode.
On Battery Power
Check this to run in power saving mode when on battery power.
Power is turned off if there is no transmission for the time specified.
Select the length of time for power saving mode from the pulldown
menu.
155
Toshiba Pocket PC e800/e805 User’s Guide
On External Power
Check this to run in power saving mode when on external power.
Power is turned off if there is no transmission for the time specified.
Select the length of time for power saving mode from the pulldown
menu.
Link Screen
?Link Quality
Link Quality shows quality of wireless LAN signal.
?Link Information
Link Information shows some information about your wireless LAN
adapter.
SSID: Displays the SSID currently connected to the access point
or 802.11 ad hoc network.
Channel: The number of the channel being used by the access
point or 802.11 ad hoc network.
Tx Rate: Displays the transmission rate used.
BSSID: Displays the BSSID set on the access point or 802.11 ad
hoc network.
IP Address: Displays the IP address set.
Subnet Mask: Displays the subnet mask set.
Gateway: Displays the gateway IP address set.
IP Renew: This is for attempting to renew an IP address, but can