User's Manual

Reset your Handheld PC or Toshiba
Pocket PC e800/e805 to make the
TCP/IP settings take effect.
Make sure the SSID, WEP keys and
channel for all devices in the network
are set the same.
Make sure the channel been set is in
the range of 1 to 11.
Solutions
Chapter 11: Additional Information
FAQ for Wi-Fi
A. Compatibility
A1: Should I use equipment with the same brand as the
IEEE802.11b WLAN Adapter’s to enable the wireless communication?
This is not necessary. IEEE802.11b WLAN Adapter is Wi-Fi certified
which means that it will work well with differing brands of equipment
as long as the equipment is also Wi-Fi certified.
A2: Can I connect IEEE802.11b WLAN Adapter to other devices
using Bluetooth?
No, you can only connect the IEEE802.11b WLAN Adapter to other
IEEE802.11b equipment.
B. Wireless LAN Connectivity
B1: How do I form a wireless network?
Typically, you can form a wireless network by connecting Access
Points. Different Access Points should have different channels.
Every devices connected to the network should have the same
SSID. When you are using Access Points, set the mode to “Infrastructure?
mode. Without Access Points, you can still build a network
where adapters communicate peer-to-peer using a shared SSID.
When you are not using Access Points, change the operating mode
to be ?02.11Ad Hoc? To set the operating mode, click Start, Settings,
System, Wireless LAN Utility, then Config.
B2: How can I connect my Toshiba Pocket PC e800/e805 to the
usable Wireless Network?
Click Start, Settings, System, Wireless LAN Utility, Scan to view
Scan Page where you can find the usable Wireless Network. If you
cannot see all the networks you are expecting, please click “Rescan?
to see the list of usable Wireless Networks. Choose one Wireless