User's Manual

Chapter 11: Additional Information
NOTE (1) Turn off the Wireless LAN Switch will cause the disconnection
of the Wireless Network, please make sure
to close all the Wireless Connection before you execute
this function.
(2) The Turn Off function on the TMU icon will cause the
disconnection of the Wireless Network, please make
sure to close all the Wireless Connection before you
execute this function.
(3) Enable “Power Saving Mode?will keep the connectivity
but will lower down the average throughput due to
longer connection period for the Wireless Network.
(4) If you are in 802.11 Ad Hoc Mode, you are not allowed
to enable “Power Saving Mode? because Ad Hoc
Mode doesn’t support this function.
F5: How do I make sure that the Wireless LAN SW has been
installed successfully and that Wireless LAN already work properly?
(1) Please check if the “IEEE 802.11b WLAN Adapter?already exist
in Start, Settings, Connections, Network Adapters; if not, the
Wireless LAN Driver is not Installed successfully.
(2) Please check if the Wireless LAN Utility already exist and could
be opened successfully by simply click Start, Settings, System,
then Wireless LAN Utility.
(3) Click Start, Settings, System, Wireless LAN Utility, Link to check
the current Link information in the Link Page.
Error Messages for Bluetooth
This section explains the causes of and solutions for the various
displayed
error messages.
Error messages during COM/DUN service
An error has occurred with the Bluetooth SD Card. Confirm that the
card is working properly.
Cause There was an error when loading the driver.
Solution Try reinserting the Card.
Unable to retrieve Local Device information.
Solution Reset the Toshiba Pocket PC.
Unable to retrieve Local Device information due to insufficient memory.
Check the amount of available memory.