User's Manual

2. Plug the optional USB Host Cable to the Pocket PC.

3. Connect a USB keyboard to the USB Port of the optional USB Host

Cable.

NOTE

The locks are based on foolproof design to help you connect

the Expansion Pack to the Pocket PC with the right

face-up, i.e. the face with the Release Button.

Charging the battery or connect AC adapter if the battery

power is low. You cannot use a USB keyboard if the battery

power is less than 15%.

Use only a Microsoft Pocket PC compatible keyboard.

Chapter 2: Basic Skills

Initial Setup

When using the Toshiba Pocket PC e800/e805 for the first time, follow

the initial setup procedures below, after the battery has been charged.

1. Move the battery switch to the ¡§supply¡¨ position. The Toshiba Pocket

PC e800/e805 powers on automatically and the Welcome screen

appears. Tap the screen to start the following setup.

2. Execute touch screen correction.

When the align screen appears, tap the center of the cross target

with the stylus. The next target position changes upon tapping the

target. Five taps completes the positioning correction. The screen

then changes to the Stylus screen.

If a finger or any other object touches the screen during correction,

the correction will be cancelled. Repeat the correction procedure.

3. Read how to use the stylus.

Read and understand the stylus operation, and then tap NEXT.

NOTE For more information on stylus operation, See "How to

Use the Stylus" on page 22.

4. Learn the pop-up menu operation.

Read the on-screen explanation and then follow the instructions.

Display the pop-up menu, and cut and paste the data according

to the screen instructions.

After you finish the paste operation, this stage is completed. Tap

NEXT.

5. Set the TIME ZONE.