User's Manual

You can adjust the data storing memory and the program running memory.
You can also confirm the free space of a storage card and so on.
Memory for the Pocket PC is managed automatically.
To change Memory allocation:
1. Tap and then Settings. On the System tab, tap Memory to
display the Memory setting screen.
2. Drag the knob left to right to adjust the memory allocation between
Storage and Program.
3. When finished, tap OK to return to the System tab screen.
To confirm usage status of a storage card:
1. Tap Storage card tab on the Memory setting screen.
2. When finished, tap OK to return to the System tab screen.
To release memory:
If memory is running short of its capacity, i.e., you will receive an
error
message display, the following methods are available to release the
memory:
Transfer data to a storage card and the like and delete them from the
Pocket PC, delete unnecessary files, quit a program in execution, and/or
delete a program not in use.
For more information on detailed operation method or the memory
release method other than the above, see online help.
66
Chapter 2: Basic Skills
NOTE
Flash ROM Disk (NAND Flash Memory)
The Flash ROM Disk (NAND Flash Memory) contains the built-in storage
for the Pocket PC.
Data, files or programs can be stored on the Flash ROM Disk from the
following
sources: File Explorer, Pocket Word, Pocket Excel, Notes of
Pocket Outlook, and DataBackup.
Data can be accessed on the Flash ROM Disk by using File Explorer.
1. On the Start menu, tap Programs, and then File Explorer.
2. Open Local Device folder, and then tap Flash ROM Disk.
To confirm the memory available on the Flash ROM Disk, do the following:
1. On the Start menu, tap Settings, System tab, and then Memory.
2. Tap the Storage Card tab, and then select Flash ROM Disk.