User's Manual

Microphone gain slider and combo box are available to choose pre-
set
gain settings and one check box to enable/disable the AGC.
The Record button, when it is mapped to the TVR, will start the TVR
and immediately start recording. To stop recording, press the same
button again (no need to keep the button pressed).
Using Voice Command
With Voice Command, you can operate Pocket PC ¡§hands free¡¨ without
tapping or pressing buttons on your Toshiba Pocket PC e800/e805.
The Voice Command application has 3 components:
Global Command: the command always available
User Command: the command that users can assign freely, always
available.
Command for each application: Command available only for the
foreground windows.
Installing the Voice Command
1. Make sure your Toshiba Pocket PC e800/e805 is connected to your
computer and that an ActiveSync connection has been established.
2. Start the Voice Command installation by running the Setup program.
3. After the program is installed successfully, a message displays to
inform you that the application has been allocated to the program
button 5 (recording button) automatically.
72
Chapter 2: Basic Skills
4. After installation, the system requires resetting.
NOTE The Voice Command cannot “read?without the Toshiba
Speech System installed. Installation of the Toshiba
Speech System is highly recommended.
Once Voice Command is installed on your Toshiba Pocket
PC e800/e805, the program button 5 (recording button at
initial setting) is “assigned?and recording with program
button 5 is no longer available. If you want to use program
button 5 for recording while the Voice Command is
assigned, change the button assignment by tapping Start,
Settings, and then Buttons.
Setting Up Voice Command
Once installed on your Toshiba Pocket PC e800/e805, the Voice Command
Settings icon is displayed on Today screen. Tap this icon to launch