User Manual

Menu Function
59
Raise half tone or a dot to extend half beat for previous
note.
One extend (half beat or a quarter beat) and lower.
~ Edit
follow the steps below：
a. Press numeric pads 1~7 to select note. Press
to delay in
one beat for previous note, display on screen as”-“. Press
to enter a rest note displayed as”0 “
b. Press
to switch into higher octave
c. Press
to raise or lower half tone, “#” or “.” is displayed
on screen.
d. Press
to switch for long note “-half tone = a quarter tone”
and for lower octave “.” If higher octave is selected, there won’t be
any mark for lower octaves.
e. After a tone is edited, press
to shift the cursor to the
next position, and then continue editing the next tone.
f. If the setting is not correct, please move the cursor to the
incorrect symbol to have direct revision or move the cursor to last
the note and press
to delete the note and re-enter.
g. Once editing is complete, press
to exit. If users want to
restore the original setting, press
to cancel the editing.
3. Reset
After confirming to tone reset settings, the defined tone will be
clear.
4. Tempo
There are 5 modes: More slowly, Slowly, Normal, Fast, More fast.
You can select any of the modes to adjust the rhythm.
5. Instrument
Select the instrument to edit the tone including BritePno, Marimba,