ThinkPad Yoga 260 User Guide
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix F “Notices” on page 155 The latest Safety, Warranty, and Setup Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www.lenovo.com/UserManuals First Edition (October 2015) © Copyright Lenovo 2015.
Contents Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . . . vi Conditions that require immediate action . . vii Safety guidelines . . . . . . . . . . . . vii Chapter 1. Product overview . . . . . . 1 Locating computer controls, connectors, and indicators. . . . . . . . . . . . . . . . Front view. . . . . . . . . . . . . . Right-side view. . . . . . . . . . . . Left-side view . . . . . . . . . . . . Bottom view . . . . . . . . . . . . . Status indicators . . . . .
Installing the Windows 10 operating system Installing device drivers . . . . . . . . . . Using the ThinkPad Setup program . . . . . Main menu . . . . . . . . . . . . . Config menu. . . . . . . . . . . . . Date and Time menu . . . . . . . . . Security menu . . . . . . . . . . . . Startup menu . . . . . . . . . . . . Restart menu . . . . . . . . . . . . Updating the UEFI BIOS . . . . . . . . Using system management. . . . . . . . . Setting management features . . . . . . . . . . . . . . . . . .
Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase . . . . . . . . . . . . . . . Lenovo product service information for Taiwan . . . . . . . . . . . . . . . Eurasian compliance mark . . . . . . . . . Brazil audio notice . . . . . . . . . . . . Battery recycling information for the United States and Canada . . . . . . . . . . . . . . . . . 145 . . . 146 146 146 Appendix C. WEEE and recycling statements . . . . . . . . . . . .
iv ThinkPad Yoga 260 User Guide
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Protect your computer and data when moving it. Before moving a computer equipped with a hard disk drive, do one of the following, and make sure that the power button is off or is blinking: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing.
product are zero. Before you remove the covers from a product equipped with a power cord, always make sure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
To prevent possible overheating, do not cover the power adapter with clothing or other objects when the power adapter is plugged into an electrical outlet. Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. External devices CAUTION: Do not connect or disconnect any external device cables other than USB cables while the computer power is on; otherwise, you might damage your computer.
Notice for non-rechargeable coin-cell battery DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substance. Do not heat to more than 100°C (212°F). The following statement applies to users in the state of California, U.S.A. California Perchlorate Information: Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate. Perchlorate Material - special handling may apply, See www.dtsc.ca.
• Airflow temperatures into the computer should not exceed 35°C (95°F). Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm. • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded electrical outlet.
hands, immediately wash the affected areas with water for at least 15 minutes; if any symptoms are present after washing, get medical care. Note: For products with mercury-containing fluorescent lamps (for example, non-LED), the fluorescent lamp in the liquid crystal display (LCD) contains mercury; dispose of according to local, state, or federal laws. Using headphones or earphones CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss.
xiv ThinkPad Yoga 260 User Guide
Chapter 1.
3 Ambient light sensor The ambient light sensor detects the surrounding light conditions. Then the computer adjusts the screen brightness and the keyboard backlight mode accordingly. 4 Fingerprint reader (available on some models) Fingerprint authentication technology provides simple and secure user access by associating your fingerprint with a password. For more information, see “Using the fingerprint reader” on page 63.
You also can define what the power button does. For example, by pressing the power button, you can turn off the computer or put the computer into sleep or hibernation mode. To change what the power button does, do the following: 1. Go to Control Panel and then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Power Options ➙ Choose what the power buttons do. 3. Follow the instructions on the screen.
9 Security-lock slot To protect your computer from theft, purchase a security cable lock that fits this security-lock slot to lock your computer to a stationary object. Note: You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature.
4 Always On USB connector (USB 3.
Status indicators This topic helps you locate and identify the various status indicators on your computer. 1 Fn Lock indicator The Fn Lock indicator shows the status of Fn Lock function. For more information, see “Special keys” on page 23.
2 Speaker-mute indicator When the speaker-mute indicator is on, the speakers are muted. 3 Microphone-mute indicator When the microphone-mute indicator is on, the microphones are muted. 4 Camera-status indicator When the camera-status indicator is on, the camera is in use. 6 CapsLock indicator When the indicator is on, it indicates that Caps Lock mode is enabled. You can type all alphabetic characters (A-Z) in upper case directly.
FCC ID and IC Certification information The FCC and IC Certification information is identified by a label located on the computer base cover as shown in the following illustration. The content of this label differs depending on the wireless modules that come with your computer: • For a preinstalled wireless module, this label identifies the actual FCC ID and IC certification number for the wireless module installed by Lenovo. Note: Do not remove or replace a preinstalled wireless module by yourself.
Note: For the user-replaceable wireless module, ensure that you use only Lenovo-authorized wireless modules for the computer. Otherwise, an error message will be displayed and the computer will beep when you turn on the computer. Labels for the Windows operating systems Windows 7 Certificate of Authenticity: Computer models preinstalled with the Windows 7 operating system have a Certificate of Authenticity label affixed to the computer cover or inside the battery compartment.
Features The computer features introduced in this section cover various models. For your specific model, some features might vary or not apply. Notebook computer color Black or silver Microprocessor • To view the microprocessor information of your computer, do the following: – For Windows 7: Open the Start menu, right-click Computer, and then click Properties. – For Windows 10: Do either of the following: – Open the Start menu and then click Settings.
Interface • Always On USB 3.0 connector • Audio connector • HDMI connector • Micro-SD-card slot • Micro-SIM-card tray (available on some models) • Mini DisplayPort connector • OneLink+ connector • Smart card reader (available on some models) • USB 3.
Operating environment Environment • Maximum altitude without pressurization: 3048 m (10 000 ft) • Temperature – At altitudes up to 2438 m (8000 ft) – Operating: 5.0°C to 35.0°C (41°F to 95°F) – Storage: 5.0°C to 43.0°C (41°F to 109°F) – At altitudes above 2438 m (8000 ft) Maximum temperature when operating under the unpressurized condition: 31.3°C (88°F) Note: When you charge the battery, the ambient temperature must be at least 10°C (50°F).
An introduction to Lenovo programs This topic provides a brief introduction to Lenovo programs. Depending on your computer model, some of the programs might not be available. Access Connections™ (Windows 7) The Access Connections program is a connectivity assistant program for creating and managing location profiles. Each location profile stores all the network and Internet configuration settings needed for connecting to a network infrastructure from a specific location such as a home or an office.
Lenovo ID (Windows 10) Lenovo PC Experience (Windows 7 and Windows 10) The Lenovo ID program enables you to create and manage your Lenovo ID. With a Lenovo ID, you can connect to everything Lenovo through a single account. Use your Lenovo ID for quick and simple authentication and then enjoy the various services provided by Lenovo. Such services include online shopping, app download, personalized device support, special promotional offers, Lenovo forums, and so on.
System Update (Windows 7) WRITEit (Windows 10) The System Update program enables you to keep the software on the computer up-to-date by downloading and installing software packages, including device drivers, Unified Extensible Firmware Interface (UEFI) basic input/output system (BIOS) updates, and other third-party programs. WRITEit gives you instant handwriting input wherever you need it.
16 ThinkPad Yoga 260 User Guide
Chapter 2.
• For Windows 7: Open the Start menu, then click Control Panel. • For Windows 10: Right-click the Start button, then click Control Panel. How do I use battery power more effectively when I am on the go? • To conserve power, or to suspend operation without exiting programs or saving files, see “Power-saving modes” on page 38. • To achieve the best balance between performance and power saving, change power plan settings. See “Managing the power plan” on page 38.
Using the special buttons The computer is equipped with special buttons as shown in the following illustration. You can control some functions of your computer through the special buttons, without the use of the keyboard. 1 Power button: Press the power button to turn on the computer. 2 Volume-up button: Press the volume-up button to increase the speaker volume. 3 Volume-down button: Press the volume-down button to decrease the speaker volume.
Touch gesture (touch models only) Description Touch: Tap. Mouse action: Click. Function: Open an app or perform an action on an open app, such as Copy, Save, and Delete, depending on the app. Touch: Tap and hold. Mouse action: Right-click. Function: Open a menu with multiple options. Touch: Slide. Mouse action: Scroll the mouse wheel, move the scroll bar, or click the scroll arrow. Function: Scroll through items, such as lists, pages, and photos. Touch: Drag an item to the desired location.
The following table introduces some touch gestures on the Windows 10 operating system. Touch gesture (touch models only) Description Touch: Swipe in from the right edge. Mouse action: Click the action center icon on the taskbar. Function: Open the action center to see your notifications and quick actions. Touch: Swipe in from the left edge. Mouse action: Click the task-view icon on the taskbar. Function: View all your open windows in task view.
ThinkPad Pen Pro Some computer models are equipped with the ThinkPad Pen Pro (an electronic pen). The ThinkPad Pen Pro enables you to input text in a natural manner in the following situations: • When you take notes • When you annotate Portable Document Format (PDF) files • When you draw graphics together with applications capable of editing and sketching When you draw or write with the ThinkPad Pen Pro, keep the pen perpendicular to the computer display to achieve the best line quality.
• To erase ink, press and hold the eraser button 2 , and then tap the tip 1 on the computer display. Then drag the pen across the ink you want to erase. The ThinkPad Pen Pro is stored in the slot on the bottom side of the computer (as shown in the following illustration). To remove the pen, slide the end of the pen out and then completely pull the pen out of the slot. To charge the pen, insert the pen slightly into the slot until it snaps into position. The pen will be fully charged in about five minutes.
1 Windows key Press the Windows key 1 to open the Start menu. You also can use the Windows key together with another key to achieve other functions. For more information, refer to the help information system of the Windows operating system. 2 3 Fn key Function keys You can configure the Fn key and function keys in the Keyboard Properties window by doing the following: 1. Go to Control Panel and then change the view of Control Panel from Category to Large icons or Small icons. 2. Click Keyboard.
• Mutes or unmutes the microphones. When the microphones are muted, the indicator on the microphone-mute key is on. • Darkens the computer display. • Brightens the computer display. • Switches the display output location between the computer display and an external monitor. • Enables or disables the wireless features. • – For Windows 7: Opens Control Panel. – For Windows 10: Opens the Settings window. • – For Windows 7: Opens Windows Search. – For Windows 10: Opens the Cortana® search box.
Enabling the operating modes To provide your computer the flexibility of being used in various operating modes, enable the operating modes first. For the Windows 7 operating system, do one of the following to enable the operating modes: • When you enter the Windows 7 operating system for the first time, the Enable sensors window is displayed. Then click Enable this sensor. • Go to Control Panel. Click All Control Panel Items ➙ Location and Other Sensors.
Table 1. Display angle for each operating mode Notebook mode Stand mode Tablet mode Tent mode no more than 190 degrees more than 190 degrees and less than 350 degrees 360 degrees no less than 270 degrees and no more than 340 degrees Notebook mode You can use the computer in the notebook mode in scenarios that require using a keyboard and a mouse, such as editing documents and writing e-mails.
1. Slowly rotate the display clockwise until the back of the display is facing the base cover. 2. Position your computer as shown. Your computer is now in the stand mode. In the stand mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically disabled. However, you can control some functions of your computer through the special buttons and the multi-touch screen. For more information, refer to “Using the tablet buttons” on page 19 and “Using the multi-touch screen” on page 19.
If your computer is in the stand mode, do the following to turn the computer from the stand mode into the tablet mode: 1. Position your computer as shown and slowly rotate the computer display clockwise. 2. Position your computer as shown. Your computer is now in the tablet mode. By default, the autorotate feature is enabled. In the tablet mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically disabled.
1. Slowly rotate your computer display anticlockwise to any angle within a range of 190 degrees to 359 degrees. The degrees refer to the angle degrees between the computer display and the keyboard. 2. Position your computer as shown. Your computer is now in the tent mode. In the tent mode, the keyboard, the trackpad, and the TrackPoint pointing stick are automatically disabled. However, you can control some functions of your computer through the special buttons and the multi-touch screen.
• The frame of the keyboard does not travel when you rotate the computer display from 10 degrees to 190 degrees. The following illustration shows that the keyboard frame does not travel. • When you rotate the computer display from 190 degrees to 360 degrees, the frame of the keyboard travels upward for about 2.0 mm (0.08 inch). The following illustration shows that the keyboard frame travels upward.
2. Click Hardware and Sound ➙ Device Manager ➙ Keyboards ➙ Standard PS/2 keyboard and then follow the instructions on the screen. ThinkPad pointing device The ThinkPad pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling. With the ThinkPad pointing device, you also can perform a variety of touch gestures, such as rotating and zooming in or out.
The TrackPoint pointing device consists of the following four components: 1 Pointing stick Left-click button (primary-click button) Right-click button (secondary-click button) 4 Scroll bar 2 3 To use the TrackPoint pointing device, refer to the following instructions: Note: Place your hands in the typing position and use your index finger or middle finger to apply pressure to the pointing-stick nonslip cap. Use either thumb to press the left-click button or right-click button.
The trackpad can be divided into two zones: 1 2 Left-click zone (primary-click zone) Right-click zone (secondary-click zone) To use the trackpad, refer to the following instructions: • Point Slide one finger across the surface of the trackpad to move the pointer accordingly. • Left-click Press the left-click zone 1 to select or open an item. You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
Tap Tap anywhere on the trackpad with one finger to select or open an item. Two-finger tap Tap anywhere on the trackpad with two fingers to display a shortcut menu. Two-finger scroll Put two fingers on the trackpad and move them in the vertical or horizontal direction. This action enables you to scroll through the document, Web site, or apps. Two-finger zoom out Put two fingers on the trackpad and move them closer together to zoom out.
Power management The power to run your computer can come either from ac power or from the battery. Using the ac power Your computer comes with an ac power adapter and a power cord. • ac power adapter: Converts ac power for notebook computer use. • Power cord: Connects the ac outlet and the ac power adapter. While you use ac power, the battery charges automatically.
Using the battery power Before you use the battery power, ensure that you read the following notices: • “General battery notice” on page x • “Notice for built-in rechargeable battery” on page x It is hard to predict the battery life between charges. Different computer components consume power at different rates. Some components consume power very quickly, for example, the computer display, the microprocessor, and the wireless radios.
Power-saving modes There are several modes that you can use at any time to conserve power. This section introduces each mode and gives tips on the effective use of battery power. • Screen blank mode (for Windows 7 only) The computer display requires considerable battery power. To turn off the power to the display and make the computer enter screen blank mode, right-click the battery-gauge icon in the windows notification area and select Power off display.
1. From the desktop, click the battery-status icon in the Windows notification area on the taskbar. 2. Click More power options. 3. Follow the instructions on the screen. Notes: Use Lenovo programs for advanced power settings. • For Windows 7: Use the Power Manager program. • For Windows 10: Use the Lenovo Settings program. For more information, see “Lenovo programs” on page 12.
Your computer comes with a built-in wireless network card and a configuration utility to help you establish wireless connections and monitor the connection status. This enables you to stay connected to your network while you are at the office, in a meeting room, or at home, with no need for a wired connection. To establish a wireless LAN connection, do the following: 1. Click the wireless-network-connection-status icon in the Windows notification area. A list of available wireless networks is displayed. 2.
• Power to the wireless radio is on. The signal strength of the wireless connection is excellent. • Power to the wireless radio is on. The signal strength of the wireless connection is marginal. • Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve signal strength, move your computer closer to the wireless access point.
• Power to the WAN radio is off • No association • No signal • Weak signal • Medium signal • Strong signal Using the Bluetooth connection Bluetooth can connect devices a short distance from one another, and is commonly used for connecting peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or remotely controlling and communicating with devices such as mobile phones. Depending on the model, your computer might support the Bluetooth feature.
Pairing your computer with an NFC card Before you start, ensure that the card is in NFC Data Exchange Format (NDEF), otherwise the card cannot be detected. Then do the following: 1. Position the card closely above the NFC label as shown. Align the shorter edge of the card with the horizontal extension line for the center of the NFC label. 2. Slowly move the card in the direction towards computer display within a 0.5 cm (0.20 inch) distance.
Connecting an external display You can use either a wired display or a wireless display. The wired display can be connected to the HDMI, VGA, or mini DisplayPort connector by a cable. The wireless display can be added through the Wi-Di or Miracast function. • Connecting a wired display Note: When you connect an external monitor, a video interface cable with a ferrite core is required. 1.
Note: If you show DOS or programs using DirectDraw or Direct3D® in full-screen mode, only the main display shows the video output. Changing display settings You can change the settings for both the computer display and the external display. For example, you can define which one is the main display and which one is the secondary display. You also can change the resolution and orientation. To change display settings, do the following: 1.
• For Windows 7: Start the Communications Utility program. See “Accessing Lenovo programs” on page 12. • For Windows 10: Open the Start menu, and click Camera from the all apps list. When the camera is started, the green camera-in-use indicator turns on. You also can use the integrated camera with other programs that provide features such as photographing, video capturing, and video conferencing.
Installing or removing a smart card Attention: Before installing or removing a smart card, ensure that you observe the following precautions: • Before you start, read “Static electricity prevention” on page 119. • When data is being transferred, do not put your computer into sleep or hibernation mode and do not perform any installation or removal actions. Otherwise, your data could get damaged. • Do not remove a smart card while the computer is in sleep or hibernation mode.
48 ThinkPad Yoga 260 User Guide
Chapter 3. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. It includes the following topics: • “Finding ThinkPad options” on page 49 • “ThinkPad OneLink+ Dock” on page 49 Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs.
• When the dock is in sleep or hibernation mode • When the dock is turned off For more information, refer to the documentation that comes with the dock. 5 Power button: The power button on the dock functions the same as the one on the computer. 6 System-status indicator: The indicator on the illuminated ThinkPad logo functions the same as the ones on the computer. For details, see “Status indicators” on page 6. Rear view 1 USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0.
Chapter 4. You and your computer This chapter contains the following topics: • “Accessibility and comfort” on page 51 • “Traveling with your computer” on page 55 Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform.
Arm and hand position:Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position. Type with a soft touch without pounding the keys. Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest. What if you are traveling? It might not be possible to observe the best ergonomic practices when you are using your computer while on the move or in a casual setting. Regardless of the setting, try to observe as many of these tips as possible.
Keyboard shortcut Function Num Lock for five seconds Turn on or turn off Toggle Keys Left Alt+Left Shift+Num Lock Turn on or turn off Mouse Keys Left Alt+Left Shift+PrtScn (or PrtSc) Turn on or turn off High Contrast For more information, go to http://windows.microsoft.com/, and then perform a search using any of the following keywords: keyboard shortcuts, key combinations, shortcut keys.
1. Go to Control Panel, and ensure that you view Control Panel using Category. 2. Click Ease of Access ➙ Speech Recognition. 3. Follow the instructions on the screen. Screen-reader technologies Screen-reader technologies are primarily focused on software program interfaces, help information systems, and various online documents. For additional information about screen readers, see the following: • Using PDFs with screen readers: http://www.adobe.com/accessibility.
Documentation in accessible formats Lenovo provides electronic documentation in accessible formats, such as properly tagged PDF files or HyperText Markup Language (HTML) files. Lenovo electronic documentation is developed to ensure that visually impaired users can read the documentation through a screen reader. Each image in the documentation also includes adequate alternative text so that visually impaired users can understand the image when they use a screen reader.
If you are traveling to another country, you might want to consider an ac power adapter for the country to which you are traveling. To purchase travel accessories, go to http://www.lenovo.com/accessories.
Chapter 5. Security This chapter contains the following topics: • “Using passwords” on page 57 • “Hard disk security” on page 61 • “Setting the security chip” on page 62 • “Using the fingerprint reader” on page 63 • “Notice on deleting data from your storage devices” on page 66 • “Using firewalls” on page 66 • “Protecting data against viruses” on page 67 Using passwords You can help prevent your computer from unauthorized use by using passwords.
3. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter Current Password field, type the current power-on password and press Enter. b.
– Boot Order Lock – Flash BIOS Updating by End-Users – Secure RollBack Prevention – Execution Prevention – Security mode – Fingerprint reader priority Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. • When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change the settings, a supervisor password is required.
If a user hard disk password has been set, but no master hard disk password has been, the user must enter the user hard disk password to access files and applications on the hard disk drive. • Master hard disk password The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any hard disk drive in a system like a master key.
3. A Setup Notice window is displayed. Press Enter again to continue. The user hard disk password is changed. Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current master hard disk password in the Enter Current Password field and press Enter. 2.
• To provide reliable security for the UEFI BIOS, use the security chip. Refer to “Setting the security chip” on page 62. Note: The Windows 7 operating systems supports the TPM management feature. • If a Disk Encryption storage drive is installed in your computer, be sure to protect the contents of your computer memory from unauthorized accesses by use of drive encryption software, such as Microsoft Windows BitLocker® Drive Encryption. See “Using Windows BitLocker Drive Encryption” on page 62.
3. Select Security ➙ Security Chip by using the directional keys. 4. Press Enter. The Security Chip submenu opens. 5. Move to an item you want to set by using the directional keys. When the item is highlighted, press Enter. 6. Set other items that you want to set. 7. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes and exit. Notes: • Ensure that the supervisor password has been set in ThinkPad Setup.
Scanning your finger To scan your finger, tap the fingerprint reader with the top joint of your finger and hold your finger there for one or two seconds with a little pressure. Then lift the finger to complete one scan. Behavior of the fingerprint reader indicator Indicator behavior Description 1 Off The fingerprint reader is not ready for tapping. 2 Solid green The fingerprint reader is ready for tapping. 3 Amber, blinking The fingerprint cannot be authenticated.
2. When prompted, scan your finger on the fingerprint reader. 3. Enter your power-on password, hard disk password, or both as required. The connection is created. When you start the computer again, you can use your fingerprints to log in to the computer with no need to enter your Windows password, power-on password, and hard disk password. Attention: If you always use your fingerprint to log in to the computer, you might forget your passwords. Write down your passwords, and keep them in a safe place.
To improve the situation, try the following: • Clean or wipe your hands to remove any excess dirt or moisture from the fingers. • Enroll and use a different finger for authentication. Notice on deleting data from your storage devices Some of the data stored on the storage devices might be sensitive. Handing your computer over to someone else without deleting the loaded software, such as operating systems and application software, might even violate license agreements.
Protecting data against viruses Your computer is preinstalled with an antivirus program so you can detect and eliminate viruses. The antivirus program is designed to help you detect and eliminate viruses. Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After 30 days, you must renew the license to continue receiving the antivirus software updates.
68 ThinkPad Yoga 260 User Guide
Chapter 6. Advanced configuration This chapter provides the following information to help you configure the computer: • “Installing a new operating system” on page 69 • “Installing device drivers” on page 71 • “Using the ThinkPad Setup program” on page 71 • “Using system management” on page 85 Installing a new operating system In some situations, you might need to install a new operating system. This topic provides instructions on how to install a new operating system.
Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program. Otherwise the operating system will not start correctly.
Italy IT Japan JP United States US Installing device drivers Device driver is the program that operates a particular hardware device of the computer. If a device does not perform well or you install a new device, you need to install or update the corresponding device driver. For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to download and install the USB 3.0 driver. To download the latest device drivers, do the following: 1. Go to http://www.lenovo.
Main menu When you enter the ThinkPad Setup program, you will first see the Main menu as follows: • UEFI BIOS Version • UEFI BIOS Date • Embedded Controller Version • ME Firmware Version • Machine Type Model • System-unit serial number • System board serial number • Asset Tag • CPU Type • CPU Speed • Installed memory • UUID • MAC Address (Internal LAN) • Preinstalled operating system license • UEFI Secure Boot • OA3 ID • OA2 Config menu To change the configuration of your computer, select the Config tab fr
Table 3. Config menu items (continued) Menu item Submenu item Value Comments • The magic packet type Wake on LAN requires ac power. • The Wake on LAN function does not work when a hard disk password is set.
Table 3. Config menu items (continued) Menu item Submenu item Value Comments Keyboard/Mouse TrackPoint • Disabled Enable or disable the built-in TrackPoint pointing device. • Enabled Note: If you want to use an external mouse, select Disabled. Trackpad • Disabled • Enabled Enable or disable the built-in trackpad. Note: If you want to use an external mouse, select Disabled. Fn and Ctrl Key swap • Disabled • Enabled Enable exchanges of Fn and Ctrl key action at the bottom-left of the keyboard.
Table 3. Config menu items (continued) Menu item Submenu item Value Comments Display Boot Display Device • ThinkPad LCD Select a video device for boot. • Display Port • HDMI DisplayPort: Mini DisplayPort(TM) connector on ThinkPad. • Display on dock HDMI: HDMI connector on ThinkPad. Display on dock: Display connectors on dock. Boot screen is cloned to all displays on dock. Shared Display Priority • HDMI Select the priority between shared display outputs.
Table 3. Config menu items (continued) Menu item Submenu item Value Comments Adaptive Thermal Management Scheme for AC Select a thermal management scheme to use. • Maximize Performance • Balanced Scheme for Battery • Maximize Performance • Balanced Maximize Performance: Reduce microprocessor throttling. Balanced: Balance sound, temperature, and performance. Note: Each scheme affects fan sound, temperature, and performance.
Table 3. Config menu items (continued) Menu item Submenu item Value Comments Beep and Alarm Password Beep • Disabled Enable this option to have a beep sound when the system is waiting for a power-on, hard disk, or supervisor password. Different beeps will sound when the entered password matches or does not match the configured password. • Enabled Keyboard Beep • Enabled Enable or disable keyboard beep when unmanageable key combinations are pressed.
Date and Time menu To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu. Then do the following: 1. Use the cursor keys to select System Date or System Time. 2. Type a date or time. Security menu To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu. The following table lists the Security menu items. Default values are in boldface. The menu items might change without notice.
Table 4. Security menu items (continued) Menu item Submenu item Value Comments Password Count Exceeded Error • Disabled Select Enabled to show the POST 0199 error and prompt for the Security password. Select Disabled to hide the POST 0199 error and proceed without any user action needed.
Table 4. Security menu items (continued) Menu item Submenu item Value Comments Security Chip Security Chip Selection • Discrete TPM If you select Discrete TPM, you can use a discrete TPM chip with TPM 1.2 mode. If you select Intel PTT, you can use Intel Platform Trusted technology (PTT) with TPM 2.0 mode. • Intel PTT Note: Intel PTT can be used with Windows 8 or later operating system.
Table 4. Security menu items (continued) Menu item Submenu item Value Comments Memory Protection Execution Prevention • Disabled Some computer viruses and worms cause memory buffers to overflow. By selecting Enabled you can protect your computer against attacks by such viruses and worms. If after choosing Enabled you find that a program does not run correctly, select Disabled and reset the setting.
Table 4. Security menu items (continued) Menu item Submenu item Value Comments Anti-Theft Computrace Module Activation • Disabled Enable or disable the UEFI BIOS interface to activate the computrace module. Computrace is an optional monitoring service from Absolute Software. • Enabled • Permanently Disabled Note: If you set the computrace module activation to Permanently Disabled, you will be unable to enable this setting again.
To change the startup sequence temporarily so that the computer starts from a desired drive, do the following: 1. Turn off the computer. 2. Turn on the computer. When the ThinkPad logo is displayed, press F12. 3. Select the device that you want the computer to start from. Note: The Boot menu will be displayed if the computer cannot start from any devices, or the operating system cannot be found. The following table lists the Startup menu items. Default values are in boldface.
Table 5. Startup menu items (continued) Menu item Value Comments Option Keys display • Disabled If you select Disabled, the “To interrupt normal startup, press Enter.” message is not displayed during the POST. • Enabled Boot Device List F12 Option • Disabled • Enabled Boot Order Lock • Disabled • Enabled If you select Enabled, F12 is recognized and the Boot Menu window is displayed. If you select Enabled, the boot priority order is locked for your future use.
You can update the UEFI BIOS by starting your computer from a flash update optical disc or a flash update program running in the Windows environment. When you install a new program, a device driver, or hardware, you might be informed to update the UEFI BIOS. For instructions on how to update the UEFI BIOS, go to: http://www.lenovo.com/ThinkPadDrivers Using system management This topic is primarily intended for the network administrators.
Setting management features To enable a network administrator to remotely control your computer, set the following system-management features in the ThinkPad Setup program: • Wake on LAN • Network Boot sequence • Flash update Note: If a supervisor password has been set, you will be required to enter the supervisor password when you start the ThinkPad Setup program.
Chapter 7. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. This chapter provides information that can help you keep your computer running smoothly.
– If your computer uses discs as the recovery media, do not remove the disc from the drive until prompted to do so. • For suspected hard disk drive issues, refer to “Diagnosing problems” on page 93 and run a diagnostic test for the drive before you call the Customer Support Center. If your computer does not start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest. Run the test and record any messages or error codes.
For more information about how to use the System Update program, refer to the help information system of the program. Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following the important tips in this topic, you will get the most use and enjoyment out of your computer.
• Store your external and removable hard disk drive or optical drives in the appropriate containers or packaging when they are not being used. • Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device.
Cleaning your computer keyboard To clean the computer keyboard, do the following: 1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth. Note: Avoid spraying cleaner directly onto the keyboard. 2. Wipe each keytop surface with the cloth. Wipe the keys one by one; if you wipe several keys at a time, the cloth might hook onto an adjacent key and possibly damage it. Make sure that no liquid drips onto or between the keys. 3. Allow to dry. 4.
92 ThinkPad Yoga 260 User Guide
Chapter 8. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. This chapter contains the following topics: • “Diagnosing problems” on page 93 • “Troubleshooting” on page 93 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
Note: If you cannot turn off your computer, or if you cannot restart it, continue with step 2. 2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 5. Reattach the ac power adapter. Notes: a. If the computer does not turn on, continue with step 3. b.
• Message: 0189: Invalid RFID configuration information area Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace, and the UUID needs to be reinstalled. Have the computer serviced. • Message: 0190: Critical low-battery error Solution: The computer turned off, because the battery is low. Connect the ac power adapter to the computer and charge the battery.
• Message: Error: The System UEFI Variable Storage is nearly full. Note: This error indicates that the operating system or applications cannot create, modify, or delete data in the non-volatile system UEFI variable storage due to insufficient storage space after POST. The non-volatile system UEFI variable storage is used by the UEFI BIOS and by the operating system or applications. This error occurs when the operating system or applications store large amounts of data in the variable storage.
If the problem persists, have the computer serviced. • Problem: My screen goes blank while the computer is on. Solution: Your screen saver or power management might have been enabled. Do one of the following: – Touch the TrackPoint pointing device or the trackpad, or press a key to exit the screen saver. – Press the power button to resume the computer from sleep or hibernation mode. Beep errors Table 6.
Ethernet problems • Problem: The computer cannot connect to the network. Solution: Make sure that: – The cable is installed correctly. The network cable must be securely connected both to the Ethernet connector of your computer and to the RJ45 connector of the hub. The maximum allowable distance from the computer to hub is 100 meters. If the cable is connected and the distance is within acceptable limits but the problem persists, try a different cable. – You are using the correct device driver.
• The Airplane mode is off. • Your wireless LAN driver is the latest version. • Your computer is within range of a wireless access point. • The wireless radio is enabled. Note: If you are using the Windows 7 operating system, click Show hidden icons on the taskbar. The Access Connections icon is displayed. For more information about the icon, refer to the Access Connections help information system. For the Windows 7 operating system, check the Network Name (SSID) and your encryption information.
– When the temperature changes • Problem: The TrackPoint pointing device or trackpad does not work. Solution: Ensure that the TrackPoint pointing device or trackpad is enabled in the Mouse Properties window. Keyboard problems • Problem: All or some keys on the keyboard do not work. Solution: If an external numeric keypad is connected: 1. Turn off the computer. 2. Remove the external numeric keypad. 3. Turn on the computer and try using the keyboard again.
3. Right-click on the desktop, and do the following: – For Windows 7: Click Screen resolution. – For Windows 10: Click Display settings, show the displayed window in full screen, and then click Advanced display settings. Note: If your computer cannot detect the external monitor, click the Detect button. 4. Select the external monitor and set Resolution. 5. Do the following: – For Windows 7: Click Advanced settings. – For Windows 10: Click Display adapter properties. 6. Click the Monitor tab.
2. Click Hardware and Sound ➙ Power Options ➙ High performance. 3. Show the additional plans, then choose High performance. • Problem: When I turn on the computer, nothing is displayed on the screen and the computer does not beep while starting up. Note: If you are not sure whether you heard any beeps, turn off the computer by pressing and holding the power button for four seconds or more. Then turn on the computer and listen again.
– If the external monitor supports a lower resolution than the computer display, view output on the external monitor only. (If you view output on both the computer display and the external monitor, the external monitor screen will be blank or distorted.) • Problem: You cannot set a higher resolution than the present one on your external monitor. Solution: Make sure that the monitor type and other information is correct. If necessary, update the monitor driver.
and adjust the settings there. Usually the external monitor has buttons for access to the setup menu. For more information, see the documentation that comes with the monitor. Audio problems • Problem: Wave or MIDI sound does not play correctly. Solution: Make sure that the built-in audio device is configured correctly. 1. Open Control Panel. 2. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4.
Solution: It is normal for the sliders to change position when certain sound programs are used. The programs are aware of the settings in the Volume Mixer window and are allowed to change the settings themselves. An example is the Windows Media Player. Usually the program has sliders available to control the sound from within the program. • Problem: The balance slider cannot completely mute one channel.
Solution: The surge protector in the batteries might be active. Turn off the computer for one minute to reset the protector; then turn on the computer again. • Problem: The batteries cannot be charged. Solution: You cannot charge the batteries when they are too hot. Turn off the computer and allow them to cool to room temperature. After they cool, recharge the batteries. If they still cannot be charged, call Lenovo Customer Service Center to have them serviced.
If you receive an error message before the operating system loads, follow the appropriate corrective actions for power-on self-test (POST) error messages. See “Error messages” on page 94. If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items: 1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message. 2. Go to the Microsoft Knowledge Base homepage at http://support.
Solution: Check whether any option has been selected to disable your computer from entering sleep or hibernation mode. If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB device. • Problem: The batteries discharge slightly while the computer is in hibernation mode. Solution: If the wakeup function is enabled, the computer consumes small amount of power.
Refer to “Diagnosing problems” on page 93 and run a diagnostic test of the USB connector. A ThinkPad Pen Pro problem Problem: The ThinkPad Pen Pro does not perform well. Solution: If the pen does not perform well, insert the pen into the pen slot to charge it for about five minutes. Note: Ensure that your computer is on. Otherwise, the pen will not be charged. Chapter 8.
110 ThinkPad Yoga 260 User Guide
Chapter 9. Recovery overview This chapter provides information about the recovery solutions. This chapter contains the following topics: • “Recovery overview for the Windows 7 operating system” on page 111 • “Recovery overview for the Windows 10 operating system” on page 116 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system.
Using recovery media On the Windows 7 operating system, you can use recovery media to restore the computer to the factory default settings only. You can use recovery media to put the computer in an operational state after all other methods of recovery have failed. Attention: When you use recovery media to restore the computer to the factory default settings, all the files currently on the storage devices will be deleted and replaced by the factory default settings.
4. Follow the instructions on the screen to complete the recovery operation. For more information about performing a recovery operation from the Rescue and Recovery workspace, see “Using the Rescue and Recovery workspace” on page 113. Using the Rescue and Recovery workspace The Rescue and Recovery workspace resides in a protected, hidden area of your storage devices that operates independently from the Windows operating system.
Note: After restoring your storage devices to the factory default settings, you might have to reinstall device drivers for some devices. See “Reinstalling preinstalled programs and device drivers” on page 114. Creating and using a rescue medium With a rescue medium, such as a disc or a USB hard disk drive, you can recover the computer from failures that prevent you from gaining access to the Rescue and Recovery workspace on your hard disk drive. Notes: 1.
Reinstalling preinstalled programs To reinstall selected programs, do the following: 1. Turn on your computer. 2. Go to the C:\SWTOOLS directory. 3. Open the APPS folder. The folder contains several subfolders named for the various preinstalled applications. 4. Open the subfolder for the program you are reinstalling. 5. Double-click Setup, and then follow the on-screen steps to reinstall the program.
It is important to create a rescue medium and a set of recovery media as early as possible and store them in a safe place for future use. Recovery overview for the Windows 10 operating system The Windows recovery programs enable you to reset your computer or use advanced startup options. It is recommended that you create a recovery USB drive as early as possible. Store the recovery USB drive as a backup or replacement for the Windows recovery programs.
Creating and using a recovery USB drive You can create a recovery USB drive as a backup for the Windows recovery programs. With the recovery USB drive, you can troubleshoot and fix the problems even if the preinstalled Windows recovery programs are damaged. Creating a recovery USB drive The USB drive that you use to create the recovery USB drive must be at least 16 GB of storage. The actual USB capacity that is required depends on the size of the recovery image.
118 ThinkPad Yoga 260 User Guide
Chapter 10. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer. This chapter contains the following topics: • “Static electricity prevention” on page 119 • “Disabling the built-in battery” on page 119 • “Installing or replacing the micro SIM card” on page 120 • “Installing or removing the micro SD card” on page 121 • “Replacing the base cover assembly” on page 123 • “Replacing the M.
5. Click Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off. Wait for three to five minutes to let the computer cool. Installing or replacing the micro SIM card Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Micro SIM card is a small plastic card with Integrated Circuit (IC) chip mounted on one side of the card.
4. Gently take the micro SIM card out of the tray. 5. Install a new micro SIM card into the micro-SIM-card tray. 6. Insert the tray into the computer. 7. Reconnect the ac power adapter and all cables. Installing or removing the micro SD card Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Your computer has a micro-SD-card reader that supports the following types of cards: Chapter 10.
• Secure Digital (SD) card • Secure Digital High-Capacity (SDHC) card • Secure Digital eXtended-Capacity (SDXC) card Note: Your computer does not support the content protection for recordable media (CPRM) feature for the SD card. Attention: • Before handling a micro SD card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity can damage the card.
2. Insert the card into the micro-SD-card slot. The card might stop before it is completely installed into the card reader. Ensure that you insert the card firmly until you hear a click. Note: Ensure that the metal contacts of the card are facing down and pointing toward the computer. Replacing the base cover assembly Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi.
5. Pry up the latches in ascending alphabetical order (a to f) as illustrated, and then remove the base cover assembly. 6. Install the new base cover assembly in place. 7. Tighten the screws to secure the base cover assembly. 8. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the M.2 solid-state drive Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi.
Attention: The M.2 solid-state drive is sensitive. Incorrect handling can cause damage and permanent loss of data. Observe the following guidelines: • Replace the M.2 solid-state drive only if you upgrade it or have it repaired. The connectors and slot of the M.2 solid-state drive are not designed for frequent changes or replacement. • Do not drop the M.2 solid-state drive or subject it to physical shocks. Put the M.2 solid-state drive on a material, such as soft cloth, that absorbs any physical shocks.
6. Remove the M.2 solid-state drive. 7. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then carefully insert the M.2 solid-state drive into the slot at an angle of about 20 degrees. Pivot the M.2 solid-state drive downward until it snaps into place. Ensure that the M.2 solid-state drive is firmly installed in the slot and cannot be moved easily.
8. Install the screw to secure the M.2 solid-state drive. 9. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 123. 10. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing a memory module Before you start, print these instructions. Read the important safety information first. See “Important safety information” on page vi. Increasing memory capacity is an effective way to make programs run faster.
5. Open the latches on both sides of the memory slot at the same time 1 , and then remove the memory module 2 . Save the removed memory module for future use. 6. Place the notched end of the new memory module toward the contact edge side of the memory slot. Then insert the memory module 1 into the slot at an angle of about 20 degrees. Pivot the memory module downward until it snaps into place 2 . Ensure that the memory module is firmly installed in the slot and cannot be moved easily.
Attention: Before you start installing the wireless WAN card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the card. To replace the wireless WAN card, do the following: 1. Turn off your computer and disconnect the ac power adapter and all cables from the computer. 2. Disable the built-in battery. See “Disabling the built-in battery” on page 119. 3. Close the computer display and turn the computer over. 4.
8. Connect the antenna cables to the wireless WAN card. Ensure that you attach the orange cable to the main connector and the blue cable to the auxiliary connector on the wireless WAN card. 9. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 123. 10. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the coin-cell battery Before you start, print these instructions. Read the important safety information first.
DANGER If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery away from fire. • Do not expose it to excessive heat. • Do not expose it to water or rain. • Do not short-circuit it. • Do not drop, crush, puncture the battery, or make it subject to strong forces.
6. Install the new coin-cell battery 1 and attach the connector 2 . 7. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 123. 8. Turn the computer over again. Connect the ac power adapter and all cables to the computer. After you replace the coin-cell battery, reset the system date and time in the ThinkPad Setup program. See “Date and Time menu” on page 78.
Chapter 11. Getting support This chapter contains the following topics: • “Before you contact Lenovo” on page 133 • “Getting help and service” on page 133 • “Purchasing additional services” on page 135 Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site. Registering your computer Register your computer with Lenovo.
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. That documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web. Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc.
• • • • • • Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts Identification of software problem sources Configuration of the UEFI BIOS as part of an installation or upgrade Changes, modifications, or upgrades to device drivers Installation and maintenance of network operating systems (NOS) Installation and maintenance of application programs For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product, see “Warranty information
136 ThinkPad Yoga 260 User Guide
Appendix A. Supplemental information about the Ubuntu operating system In limited countries or regions, Lenovo offers customers an option to order computers with the preinstalled Ubuntu® operating system. If the Ubuntu operating system is available on your computer, read the following information before you use the computer. Ignore any information related to Windows-based programs, utilities, and Lenovo preinstalled applications in this documentation.
– Color display – Integrated camera – Integrated microphones • Interface – Audio connector – Ethernet extension connector – External monitor connectors – High Definition Multimedia Interface (HDMITM) connector – Mini DisplayPort connector – HDMI audio 2 channel – Media card reader – Secure Digital (SD) – Secure Digital High-Capacity (SDHC) – MultiMediaCard (MMC) – USB 3.0 connector – Always On USB 3.
Note: Depending on the model, some of the components and features might not be available on your computer. • Accelerometer • Fingerprint reader • HDMI 5.1 channel • Hybrid Graphic card • Integrated wireless Wide Area Network (WAN) • Modems • Surround audio • Smart card reader • OneLink+ connector Appendix A.
140 ThinkPad Yoga 260 User Guide
Appendix B. Regulatory Information The latest compliance information is available at http://www.lenovo.com/compliance. Locating the UltraConnect™ wireless antennas ThinkPad models feature a diversified antenna system built into the display for optimal reception, which enables wireless communication wherever you are.
Your Bluetooth card is compliant with Bluetooth Specification 4.0 as defined by the Bluetooth Special Interest Group SIG. The following profiles are supported by Bluetooth devices: Note: Depending on the Bluetooth card and the operating system you use, some profiles might not be available.
Wireless-radio compliance information Computer models equipped with wireless communications comply with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Brazil wireless-radio compliance information Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten und hält die Grenzwerte der EN 55022 Klasse B ein. Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden. Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung der Lenovo verändert bzw.
Lenovo product service information for Taiwan Eurasian compliance mark Brazil audio notice Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.
Appendix C. WEEE and recycling statements Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. The latest environmental information is available at http://www.lenovo.com/ecodeclaration.
for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at http://www.lenovo.com/recycling/japan. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003.
Battery recycling information for Taiwan Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union.
150 ThinkPad Yoga 260 User Guide
Appendix D. Restriction of Hazardous Substances Directive (RoHS) The latest environmental information is available at http://www.lenovo.com/ecodeclaration. European Union RoHS This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo worldwide compliance on RoHS, go to: http://www.lenovo.
China RoHS 152 ThinkPad Yoga 260 User Guide
Appendix E. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might find an ENERGY STAR mark affixed on the computer or displayed on the power settings interface.
5. Clear the Allow this device to wake the computer check box. 6. Click OK.
Appendix F. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
To access the latest information of your computer, go to: http://www.lenovo.com/UserManuals Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Access Connections Active Protection System Rescue and Recovery Secure Data Disposal ThinkPad logo ThinkPad TrackPoint UltraConnect Yoga Mini DisplayPort (mDP) is a Trademark of the Video Electronics Standards Association.
