OPERATING MANUAL (VC-7C) Revision : 0.
CONTENTS IMPORTANT SAFETY INFORMATION GETTING TO KNOW YOUR PHONE DISPLAY INDICATOR BATTERY INFORMATION BASIC FUNCTIONS 1. Turning Your Phone On 2. Making a Call 3. Ending a Call 4. Answering a Call 5. Correcting Dialing Mistakes 6. Storing Phone Numbers 7. Adjusting Earpiece Volume During a Call 8. Adjusting Voice Volume 9. Redialing Last Number, Received # & Missed call 10. Speed Dialing 11. Using Caller ID 12. Etiquette Mode MENUS I. II. Phonebook 1. How to add Phonebook 2.
1. Bell Type 2. Ring Type 3. Volume 4. Alert Setting 5. Beep Length 6. Keypad Tone III. Personal Information Management 1. Alarm 2. Schedule 3. Memo 4. Calculator 5. World Time View IV. PHONE SETTING MENU 1. Wallpaper 2. Greeting Edit 3. Backlight 4. LCD Contrast 5. Set IP Phone 6. Languages V. Call Manage 1. Call Forward - Always - Busy - Unreachable - Disable 2. Call Function - Auto Answer - Call Waiting - Caller ID 3. 4.
- Anykey Answer - Folder Open 5. Cal Time 6. SECURITY FUNCTION 1. Phone Lock 2. Changing Password 3. Memory Clear 4. Initialization 5. Privacy Information 6. PIN Control 7. VAS 1. Games - Black Jack - Othello 2. UTK 3. Haier Service MESSAGE SERVICES I. TEXT MESSAGE SERVICES (SMS) 1. Read Text Messages 2. Sending Text Messages II. VOICE MAIL SERVICE III. SMS Setting IV. 1. Delivery ACK 2. MSG Alert 3. Group Edit 4. MSG Save 5. Priority 6.
USING MENU During a Call 1. Phone Book Search 2. Mute 3. DTMF Mute 4. Mic Volume ENTERING LETTERS & NUMBERS 1. Chinese Text Input B. Text Input by PinYin C. Text Input by Stroke 2. English Text Input D. Prediction Text Input E. ABC/123 Mode 3.
IMPORTANT SAFETY INFORMATON Some of the following information may not apply to your particular product. However, as with any electronic product, you should observe safety precautions when you use this product. Save this manual : it contains important safety information and operating instructions. Before using this product, please follow and adhere to all warnings, safety, and operating instructions located on the product and in this User ’s Manual. Do Not expose the product to water or moisture.
Do Not attempt to disassemble the product – doing so will void the warranty. This product does not contain consumer-serviceable components. Service should be performed only by Authorized Service Centers. Do Not remove the antenna. A detached antenna may be a choking hazard for children. Do Not allow battery to be placed inside the mouth. Electrolytes could be released and may be toxic if swallowed.
GETTING TO KNOW YOUR PHONE Active Folder : Just open the folder to answer an incoming call, and close the folder to hang up. LED Indicator : Flashes to indicate an incoming call or message. It also lights up (flashes) when you turn on the phone. Volume/Scroll Keys : This keys are used to set volume levels, a etiquette mode and help you navigate through Menus and the phone book. Press the volume keys to : - Go to Etiquette mode to press “ ” key while flip closed. - Adjust voice volume during conversation.
“up”, and press “ ” key to scroll “down”. And use it to scan menu options. View calendar by pressing the left key. Game by pressing the right key. UTK function by pressing the bottom key (“ ”). Microphone : Your typical voice microphone for conversation and you can also mute the microphone during conversation by pressing “MENU” “4”. Accessories Connector : The location where you connect your charging device.
DISPLAY INDICATORS Display indicators appear across the bottom of your phone’s LCD screen. These display indicators (or icons) will vary based on your phone’s operating modes. Signal strength : This icon shows your current signal strength. More lines indicate more signal strength. Five lines indicate maximum strength, and one line indicates least strength. Out of Service Indicator: This icon indicates that your phone cannot find a signal because you’re outside a service area.
BATTERY INFORMATION Your phone comes with a partially charged, rechargeable Li-ion battery so that you can use the phone immediately after it is activated. Installing the Battery. To attach the battery to your phone : 1. Hold the battery so that metal contacts on the base of the battery line up with the metal contacts on the base of the phone. 2. Place the battery on the back of the phone with the top of the battery about a quarter of an inch from the latch. 3.
to do so may causes damages to the phone. A completely discharged standard battery recharges fully in approximately tbd hours. The extended battery recharges in approximately tbd hours. Leaving your phone turned on during charging, or charging batteries simultaneously, will increase charging time. Leaving the battery in the charger once it is fully charged does not harm the battery. Turning your phone on and off. When you’re ready to turn your phone on, press and hold “END/ ” until the LED comes on.
BASIC FUNCTIONS 1. Turning Your Phone On The first time you turn your phone on after UIM installed, your phone asks you to enter the “PIN1” password that you receive from the carrier with UIM. After you successfully enter the password, you can use your phone. If you want to UIM “Enabled” or “Disabled” or if you want to change PIN password, please refer to “VI. SECURITY FUNCTION” on page . If you fail to enter the correct password 3 times, the phone will be blocked.
Phone numbers for frequently used services are pre-programmed into your phone. To store a number, - After dialing a number, press “STO ( )” key. Then you can see an image of the phone and UIM on the display. - Select one of them to store or edit. - Press “EDIT” and enter the name. Press “OK” to finish. Scroll “ / ” to edit the location number and hone numbers. Once you finish editing, press “OK” to save. - For more information, see “1. PIM” on page . 7.
Note : There are three phone numbers you can store in one location number, “Home”, “Office”, “Mobile”. Once you press a location number to call, your phone will connect the number, which you stored first. For example, if you store a number under “Home”, “Office” and “Mobile” orderly, your phone will connect to “Home” number. 11. Using Caller ID. This feature tells you who is calling you by displaying the caller ’s number when the phone rings.
MENUS I. Phone Book 1. How to add Phonebook To add a phone number in Phonebook, press “MENU” and “1. PB Add”. - Then you can see an image of the phone and UIM on the display. Select one of them to store or edit. - Choose a type of the phone number among the image of a mobile phone, Home, Office and etc by scrolling “ - ”. Once you choose a type of the phone number, press “EDIT” and enter the name. Press “OK” to save the name. - Scroll “ / ” to edit the location number and the phone number.
the image of UIM. Then you can store the phone number in UIM as the same manner as above. 2. Phonebook Search a. Search by name You can find a number you stored in Phone Book by entering a name. - Press “MENU ( )”, “2. PB Search” and select “1. Name”. - Enter the name you want to call. - If you don’t remember the full name, just enter the first letter of the name. Your phone will show you all similar names. - Press “SEND” to dial. - Or press “VIEW ( )” to edit or “DEL” to delete. b.
- Scroll “ ” or “ ” to select “BUSINESS”, “FRIENDS”, “FAMILY” or “ETC”. - Once you select “BUSINESS”, “FRIEND”, “FAMILY” or “ETC”, you can see the numbers you stored and defined only as “BUSINESS”, “FRIEND”, “FAMILY” or “ETC”. - Place the cursor on the number you want to dial by scrolling “ ” and “ ” and press “SEND” to dial. - Press “SEND” to dial. Press “EDIT ( )” to edit. Or press “DEL” to delete. e. Phonebook List Search f. - Press “MENU ( )”, “1. PB Search” and select “5. PB List”.
5. Phonebook Information You can check how many location stored in your phone and UIM. - Press “Memu ( )” and “5. PB Info”. - Then you will see the number of location stored in UIM and your phone.
II. VOLUME & ALERT 1. Bell Type This option enables you to set a ring type for incoming calls in bells and 40 poly MIDI melodies. a. Bell Select - Press “Menu ( )”, “ ” to fine “2. Vol/Alert” and choose “1. Bell Select” and “1. Bell” - Scroll “ ” and “ ” to select bell types. While you scroll, you can hear bells and melodies. - Press “OK ( )” to set. b. MIDI Melody Select - Press “Menu ( )”, “ ” to fine “2. Vol/Alert” and choose “1. Bell Select” and “1. Bell” - Press “Menu ( )”, “ ”, “2.
Volume”. - Scroll “ ” and “ ” to increase or decrease the volume level. - Press “SEL ( )” to set. b. Key Volume Key Volume option allows you to set the level of the key volume. - Press “Menu ( )”, “ ” to fine “2. Vol/Alert” and choose “3. Volume” and “2. Key Volume”. - Scroll “ ” and “ ” to increase or decrease the volume level. - Press “SEL ( )” to set. c. Call Volume Call Volume option allows you to set the level of the earpiece volume. - Press “Menu ( )”, “ ” to fine “2.
Drop”. - Select “On” or “Off” and press “OK ( )” to set. c. 1 Minute Alert “1 Minute Alert” option allows you to hear a torn every 1 minute while you are calling. - Press “Menu ( )”, “ ” to fine “2. Vol/Alert” and choose “4. Alert Setting” and “3. Minute”. - Select “On” or “Off” and press “OK ( )” to set. d. Service “Service” option allows you to hear a torn when you move to other base stations during a call. - Press “Menu ( )”, “ ” to fine “2. Vol/Alert” and choose “4. Alert Setting” and “4.
III. Personal Information Management Your phone support you various additional functions, such as “Alarm”, “Schedule”, “Memo”, “Calendar” and “World Time”. 1. Alarm You can set the 24-hour alarm to sound an alert at the set time, when your phone is on. If the phone is off at the alarm set time, the alarm will not sound. To set the alarm, press “Menu ( )”, “ ” to fine “3. PIM” and choose “1. Alarm”. - Choose “Alarm 1” or “Alarm 2” and press “SEL”. - Enter the time and choose AM or PM by pressing “ ”.
a. Add Schedule : - Select “1. Add Schedule”. Then you can see the calendar of this month on the display. - Scroll “ ” and “ ” to choose the date and press “OK ( )”. Or you can move the month by scrolling the side keys on left side of the phone (volume keys). - Press “ ” and enter the time (hour, minute and AM/PM). - Press “ ” and enter a memo under “Input Schedule”. - Press “ ” and choose the bell type by scrolling “ - Press “OK ( )” to save.
Memo, press “Menu ( )”, “ ” to fine “3. PIM” and choose “3. Memo”. a. Add Memo : - Choose “1. Add” and press any numeric keys to enter a memo. - Input or edit your jobs to do and press “OK” twice to save. b. Memo List : - Choose “2. List”. Then your phone will show you all memo list that you stored. - Select by scrolling “ ” and “ ” and press “SEL ( - Then you will see the memo and time you stored. - If you want to edit, press “EDIT ( )”. )”. c. Delete : - Select “3. Delete”.
IV. PHONE SETTING MENU 1. Wallpaper You can have the phone display various welcome greeting on stand-by mode. To edit the greeting for the main LCD on stand-by mode: - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and “1. Wallpaper”. - Scroll “ ” to choose a wallpaper and press “OK” to save. 2. Greeting Edit If you want to edit the banner; - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and “2. Greeting”. - Press “1. Banner Select” and choose “Provider” or “User”.
- Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “5. Set IP Phone”. Then you can see IP Call. - If you want to edit, press “EDIT ( - Press “OK ( )” to save. )” and enter the new number. 6. Languages You can choose between two different languages (Chinese & English) for text shown in the display. To change languages, - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “5. Language Set”. - Select “Chinese” or “English”. - Press “OK ( )” to set.
V. Call Function 1. Call Forward a. Always - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “1. Call Forward” and “1. Always”. - Choose “Enable” or “Disable” and press “OK” to save. b. Busy - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “1. Call Forward” and “2. Busy”. - Choose “Enable” or “Disable” and press “OK” to save. c. Unreachable - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “1. Call Forward” and “3. Unreachable”.
- Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “2. Call Function” and “3. Caller ID”. - Choose “On” or “Off” and press “OK” to save. 3. Call Restrict a. Send Call - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “3. Call Restrict” and “1. Send Call”. - Choose “On” or “Off” and press “OK” to save. b. International - Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “3. Call Restrict” and “2. International”. - Choose “On” or “Off” and press “OK” to save. c.
b. Home Calls Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “5. Call Time” and “2. Home Calls”. Then your phone indicates the approximate total time in hours and minutes that the phone has been used in your provider ’s service area. c. Roam Calls : Press “Menu ( )”, “ ” to fine “4. Phone Setting” and choose “5. Call Time” and “3. Roam Calls”. Then your phone indicates the approximate total time in hours and minutes that the phone has been used in roaming area. d.
VI. SECURITY FUNCTION Your phone provides many security options, including a user -programmable lock code and call restriction features. To access the Security menu in Standby mode, press “Menu ( )” and “6. Security”. And enter the four-digit password. Note : The password is “0000” if you don’t have your phone number yet. Or the last 4 digits of your number if you already have you phone number. If you want to change the password, see below; 1.
- Enter the new password again and press “OK ( )” to set. 3. Memory Clear Memory Clear option allows you to clear call lists, which you called, received and stored, schedules or all information in memory. - Press “Menu ( )”, “ ” to fine “6. Security” and choose “3. Memory Clear”. - Enter the password. - Choose “1. PhoneBook”, “2. UIM Phonebook”, “3. Schedule”, “4. Memo”, “5. SMS”, “6. UIM SMS” or “7. All”. - Press “OK ( )” to erase the memory. 4.
a. PIN Disable - Press “Menu ( )”, “ ” to fine “6. Security” and choose “6. PIN Control”. - Enter the password. - Choose “1. Disable PIN” - Enter the password that you received from the carrier. - If your UIM is already disabled, your phone will show you “Already , PIN is Disabled”. Note:) For the security reason, you can enter the password only 3 times. If you enter a wrong password, the phone displays the total number that you can try to enter.
VII. VAS 1. Games You can enjoy games with your phone, such as “Black Jack” and “Othello”. To access games; - Press “Menu ( )”, “ ” to fine “7. VAS” and choose “1. Games”. - Choose “1. Black Jack” or “2. Othello”. - Enjoy games. If you want your phone in silence while you play games, press “Menu ( )”, “ ” to fine “7. VAS” and choose “1. Games” and “3. Game Vol”. Set “Game Volume Off” and press “OK”. To see the game result you played, press “Menu ( )”, “ ” to fine “7. VAS” and choose “1.
MESSAGE SERVICES Your phone can receive two types of message service – text messages and voice mail – and you can send a text message (SMS : Short Messaging Service) if these services are available from your service provider. If you subscribe to either or both services, callers can leave you text messages or voice mail. Your service provider then transmits the text messages and voice mail notifications to your phone. I.
- If you want to call to a sender back, simply press “SEND” while you are reading a message. 2. Sending a Text Message (SMS : Short Messaging Service) You can send a text message through your phone. To edit and send a text message; - Press “SMS” and “2. Send MSG”. - Choose “1. New MSG”, “2. MSG Sent” or “Canned MSG”. And write a new message or edit sent/canned messages. - Once you finish to write a message, press “OK ( )”.
If your phone is turned ON when it receives a voice message, your phone sounds an alert or vibrates and is shown on the display. You have a choice of listening the message immediately by pressing “SMS” key or listening it later. To listen a new voice message; - Press “SMS” and choose “4. Voice Mail” and “1. Listen to MSG”. - Then the time you received, a sender and sender ’s phone number appear on the display. - If you want to listen a voice message, dial “*** (carrier ’s voice mail service number)”.
( )” twice. Then you can enter a new number or add from the number you sent or add from Phone Book. - Choose “1. New Number”, “2. Number Sent” or “3. Phone Book”. - Enter or edit the number and press “OK ( )” to save. - You can add up to 10 different numbers in one Group. 4. Message Save If you want to save the message in either the phone or UIM, - Press “SMS”, “3. SMS Setting”, “4. Msg Save” and “1. Save Location”. - Choose “UIM” or “Phone” and press “OK ( )” to save.
- Or press “SMS”, “5. Delete All” and choose “1. Phone Inbox”, “2. Phone Outbox” or “3. UIM”. - Press “OK ( )” to erase all messages.
USING MENU During a Call 1. Phonebook Search You can find a phone number during a call. Press “Menu ( )” and “1. Phonebook Search”. 2. Mute To mute the microphone, press “Menu ( )” and “2. Tx Voice Mute”. And to release muting the microphone, press “Menu ( )” and “2. Tx Voice Mute” again. 3. DTMF Mute To mute the keytone, press “Menu ( )” and “3. DTMF Mute”. And to release muting DTMF, press “Menu ( )” and “3. DTMF Mute” again. 4. Mic Volume To increase the microphone volume, press “Menu ( )” and “4.
ENTERING LETTERS & NUMBERS You can enter letters, as well as numbers, when storing information into your phone, writing a memo or sending SMS (Short Messaging Service) by using your phone’s keypad. To enter letters, press the key associated with the letter you wish to enter until it appears on the screen (numbers also appear). 1. Chinese Text Input a. Text Input by PinYin - Press “MODE ( )” until “ Py” is appeared on the display. - Press buttons on the keypad base on English phonetic spelling.
keypad as the same manner of PinYin. - After you write a character, your phone predicts and shows next characters that are mostly used and combined with the first character. - Choose characters on the same manner or just press “SEND” to press buttons on the keypad base on English phonetic spelling. 2. English Text Input a. Prediction Text Input To enter an English letter by Prediction Text Input, - Press “MODE ( )” until “ENG” is appeared on the display.
When in ABC mode, you can press “0 (OPR) ” key and the following special characters appear. You can use these characters when storing names in your phone book or sending a text message.
FCC RF EXPOSURE INFORMATION Read this information before using your handset In August 1996 the Federal Communication Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S and international standards bodies.
