User's Manual

42
ENTERING LETTERS & NUMBERS
You can enter letters, as well as numbers, when storing information into your phone, writing a
memo or sending SMS (Short Messaging Service) by using your phone’s keypad. To enter
letters, press the key associated with the letter you wish to enter until it appears on the screen
(numbers also appear).
1. Chinese Text Input
a. Text Input by PinYin
- Press “MODE ()” until “ Py” is appeared on the display.
- Press buttons on the keypad base on English phonetic spelling. Then phonetic English
word and 8 Chinese characters will be displayed on the bottom.
- Scroll “*” or “#” to choose an English phonetic word and press “SEND” to see the
Chinese characters. 8 characters will be shown in 1 line and there are 2 lines on the
bottom.
- Press “0” to move to the next line until you find a character you want to write.
- When you find it, place the cursor on the line and press a number on the numeric
keypad.
Note) Once you place a cursor on the line, each character is counted from left to right.
Then select the number on the keypad for each applicable character.
- After you write a character, your phone predicts and shows next characters that are
mostly used and combined with the first character.
- Choose characters on the same manner or just press “SEND” to press buttons on the
keypad base on English phonetic spelling.
b. Text Input by Stroke
- Press “MODE ()” until “#” is appeared on the display.
- Press buttons on the keypad by stroke. And press “1” to write.
- Although you don’t finish to press buttons by stroke, 16 characters will be shown in 2
lines on the bottom of middle.
- Press “0” to move to the next line until you find a character you want to write.
- When you find it, place the cursor on the line and press a number on the numeric