OPERATING MANUAL (VP-5X) Revision : 0.
IMPORTANT SAFETY INFORMATION GETTING TO KNOW YOUR PHONE DISPLAY INDICATOR BATTERY INFORMATION BASIC FUNCTIONS Making a Call Ending a Call Answering a Call Correcting dialing Mistakes Storing Phone Numbers Adjusting Earpiece Volume During a Call Last Number Redial Speed Dialing Using Caller ID MENUS I. SEARCH a phone number Last 10 Numbers You Dialed Last 10 Numbers You Received ABC Search Menu Name Search Menu Location Search Menu Search by Phone Number II.
Ring Type Volume Alert IV. SECURITY Auto Lock Changing Password Memory Clear Initialization Voice Pivacy Send Call Restrict System Selection LCD Contrast V. MY DIALY Alarm Set Phone Number Store World Time View Call Time VI. MY PHONE NUMBER My Phone Number Software Version MESSAGE SERVICES I. TEXT MESSAGE SERVICES (SMS) Read Text Messages Send Text Messages Delete Messages II. VOICE MAIL SERVICE Listen Voice Mails Delete Messages III. MESSAGE ALERTS IV.
My Phone Number View Earpiece Volume Control Voice Privacy DTMF Tone ENTERING LETTERS & NUMBERS 4
IMPORTANT SAFETY INFORMATION Some of the following information may not apply to your particular product. However, as with any electronic product, you should observe safety precautions when you use this product. ◈ Save this manual : it contains important safety information and operating instructions. ◈ Before using this product, please follow and adhere to all warnings, safety and operating instructions located on the product and in this User’s Manual. ◈ Do Not expose the product to water or moisture.
does not contain consumer-serviceable components. Service should be performed only by Authorized Service Centers. ◈ Do Not remove the antenna. A detached antenna may be a choking hazard for children. ◈ Do Not allow battery to be placed in the mouth. Electrolytes could release and may be toxic if swallowed.
GETTING TO KNOW YOUR PHONE LED Indicator : Flashes to indicate an incoming call or message. Also lights up (flashes) when you turn on the phone. Backlit LCD Screen : The LCD screen contains three areas; - The top line displays indications about your phone’s operating mode. - Two lines in the middle are the display area of numbers and characters. - The bottom line displays memus. / ) Menu Keys ( : This key performs several useful functions. - During incoming calls, press it to answer the incoming call.
END/ Key : Press this key to disconnect a call or to return to Standby mode from any menu. Press and hold this key to turn the phone On or Off. SEND Key : This key performs several useful functions. - Dial a number and press it to connect. - Press it once to redial the last outgoing number. Numeric Keys : These keys are to dial and to input numbers and characters. ◀* : This key performs several useful functions. - Change bells to vibration - Use as navigation keys.
DISPLAY INDICATORS Display indicators appear across the bottom of your phone’s LCD screen. These display indicators (or icons) will vary based your phone’s operating mode. Signal strength : This icon shows your current signal strength. More lines indicate more signal strength. Four lines indicate maximum strength, and one line indicates least strength. Digital mode : This icon indicates your phone is operating in digital mode. If you are in analog service area, “D” will be disappeared.
BATTERY INFORMATION Your phone comes with a partially charged, rechargeable Li-ion Battery so that you can use the phone immediately after it is activated. Installing the Battery. To put the battery into your phone : 1. Remove the battery compartment cover of the phone by sliding it down. 2. Put the battery pack into the battery cradle. 3. Replace the battery compartment cover by sliding it up towards the phone. 4. Before use, charge the battery pack for at least 3 hours. Charging the Battery.
If you charge the battery, a green LED on the charger denotes that the battery has completed its charge cycle. A completely discharged standard battery recharges fully in approximately tbd hours. The extended battery recharges in approximately tbd hours. Leaving your phone powered on during charging, or charging batteries simultaneously, increases charging time. Leaving the battery in the charger once it is fully charged does not harm the battery. Turning your phone on and off.
recheck for a signal, press any key. A message on the display will let you know when the phone is operating in Power Save mode. Conversation Mode. You can place and answer calls only when your phone is powered on. During a call, the phone is in Conversation mode.
BASIC FUNCTIONS Making a Call. To place a call : Press and hold “END/ ” to power on your phone. If you see indicators on the display that means the phone is on. Enter the phone number (up to 32 digits) by pressing the digit keys. The phone number displays from left to right. Press “SEND”. The phone places the call to the entered phone number (if service is available). You can also make calls ; From your Diary (see “V.
Phone numbers for frequently used services are pre-programmed into your phone. To store a number, - After dialing a number, press “ ” key. Then you can see “Location ??? / auto=001” on the display. ) to select location numbers or just press [OK] ( ). - Press [NEXT] ( - Then select “NAME” or “NUMBER EDIT” to store a name. - If you want to edit a number, press “▶ NUMBER EDIT” and edit. - Press [SAVE] ( ) to go back to previous menu (“NAME” & “NUMBER EDIT”).
- Simply press “SEND” key to redial the number you select. - Or you can also find 10 last numbers by pressing “ ”, “1: Search” and “1: Outgoing” on standby mode. Speed Dialing Once you stored phone numbers in your phone by using Phone Book, you can make a call by pressing One- or Two-Touch Dialing. Press a location number you stored, then your phone automatically connect you to the phone number you want to call. Using Caller ID.
MENUS I. SEARCH MENU Last 10 numbers you dialed - Press “MENU (‥ )”, “1: Search” and select “1: Outgoing”. Then you can see the last 10 numbers you dialed. It is the same function as “Last 10 number redial” on page - Select one of them to see the numbers and the time you dialed. - If you want to store it in Phone Book, press [SAVE] ( “Phone Number Store” on page - . ). How to store a number, see . Press “SEND” key to redial.
Name Search Menu You can find a number you stored in Phone Book by names. - Press “MENU (‥ )”, “1: Search” and select “4: Name”. - Enter the name you want to call. - If you don’t remember the full name, just enter the first letter of the name, then your phone will show you all similar names. - Press “SEND” to dial. - Or press “VIEW (‥ )” to delete or edit. Location Search Menu You can find a number you stored in Phone Book by locations. - Press “MENU (‥ )”, “1: Search” and select “5: Location”.
II. PHONE SETTING Back Light You can set backlighting of LCD display and the keypad to stay on or stay off continuously or automatically turn off in 7, 15 and 30 seconds. To set back light; - Press “Menu (‥ )”, “2. Phone Setting” and “1. Backlight”. - Select “always off”, “7 seconds”, “15 seconds”, “30 seconds” and “always on”. - Press “OK (‥ )” to set. Auto Answer The “Auto Answer” function lets the phone answer the call automatically when a call is incoming.
Anykey Answer “Anykey Answer” function makes the phone answer a call by pressing any buttons or makes the phone answer a call by pressing only “SEND” button. To set “Anykey Answer”; - Press “Menu (‥ )”, “2: Phone Setting” and “4: Anykey Answer”. - Select “Setup” for On or “Release” for Off. - Press “OK (‥ )” to set. DTMF Tone You can set DTMF tone length as normal or long. - Press “Menu (‥ )”, “2: Phone Setting” and “5: DTMF Tone”. - Select “Normal” or “Long” and press “OK (‥ )” to save.
- Press “Menu (‥ )”, “3: Sound” and “1: Ring/Vib”. - Select “Bell+Lamp”, “Vibration+Lamp”, “Bell!Vibration”, “Vibration!Bell” or “Lamp”. - Press “OK (‥ )” to set. Ring Type This option enables you to set a ring type in 10 different bells and 10 different melodies. - Press “Menu (‥ )”, “3: Sound”, “2: Ring Type” and choose “1. Ring Type” or “2. Melody Select”. - Scroll “◀ ” and “▶ ” to select. While you scroll, you can hear bells and melodies. - Press “OK (‥ )” to set.
- Press “OK (‥ )” to set. 2. Call Drop “Call Drop” option allows you to hear a warning torn when a call is disconnected occasionally or when the caller hangs up the phone. - Press “Menu (‥ )”, “3: Sound”, “4: Alert Setting” and “2: Call Drop”. - Select “CALL DROP ” on or off. - Press “OK (‥ )” to set. 3. 1 Min. Alert “1 Min. Alert” option allows you to hear a torn every 1 minute while you are calling. - Press “Menu (‥ )”, “3: Sound”, “4: Alert Setting” and “3: 1 Min. Alert”.
Your phone provides many security options, including a user-programmable lock code and call restriction features. To access the Security menu in Standby mode, press “Menu (‥ )” and “4: Security”. And enter the four-digit password. Note : The password is “0000” if you don’t have your phone number yet or the last 4 digits of your number if you already have you phone number. If you want to change the password, see “Changing Password” on page .
- Press “OK (‥ )”, then you can see “CONFIRM _ _ _ _”. - Enter the new password again and press “OK (‥ )” to set. Memory Clear Memory Clear option allows you to clear call lists, which you called, received and stored or all information in memory. - Press “Menu (‥ )” and “4: Security” and enter the password. - Press “3: Memory Clear” and choose “Outgoing”, “Incoming”, “Stored #” or “Clear All”. - Press “OK (‥ )” to erase the memory. Initialization “Initialization” let you initialize your phone.
- Press “OK (‥ )” to set. Sending Calls “Sending Calls” You can set your phone to restrict outgoing calls. - Press “Menu (‥ )” and “4: Security” and enter the password. - Press “6: Send”. - Choose “OUTGOING ▶ release” or “▶ setup” - Press “OK (‥ )” to set. Note ) Once you use this function, your phone would not work properly. Leave your phone as initially set. Network(삭제 삭제) 삭제 You can choose the network CDMA or Analog. - Press “Menu (‥ )” and “4: Security” and enter the password.
- Press “Menu (‥ )” and “4: Security” and enter the password. - Press “8: System Select”. - Scroll “◀ ” and “▶ ” to chose “Standard”, “A only”, “B only”, “C only”, “D only”, “E only”, “F only” or “home only”. - Press “OK (‥ )” to set. Note : Once you use this function, your phone would not work properly. Leave your phone as initially set. LCD contrast You can adjust LCD contrast. - Press “Menu (‥ )” and “4: Security” and enter the password. - Press “9: Contrast”.
1. Daily Alarm : Once you set the alarm using “Daily Alarm” option, your phone will sound an alert at the set time everyday. - Once you select “1: Alarm Set”, press “1: Daily”. Then “DAILY ALARM” will be shown on the display. - Select “SETUP” and press [OK] ( - Enter the time and AM/PM. - Press [YES] (‥ ) to set. )”. Note ) If you don’t want your phone alert you on weekend, see “Weekend?” below. And if you want to release the alarm setting, press “Menu(‥ ‥ )”, “5”, “1”, “1”.
Storing a Number and Name You can store phone numbers and associated names in your phone’s memory up to 100 numbers to use for Speed Dialing. Each number you store can be up to 32 digits in length, and names you store can be up to 12 characters in length. A number and a name you want to store is stored in specific memory location together. And you can use Speed Dialing to press and hold the location number. To store phone numbers and a name ; - Press “Menu (‥ )”, “5: My Diary” and “2: Number Store”.
- Press “MENU ( ) when you want to enter them between numbers and select “1- HardPause”, “2-TimePause” or “3-Hyphen”. - And continue entering numbers. World Time View Your phone shows you world 77 cities’ current time. To access the world time view; - Press “Menu (‥ )”, “5: Phone Book” and “3: World Time”. - [VIEW] “‥ ”를 누르면 그 도시의 시각을 볼 수 있다. - Use “◀ ▶ ” or [NEXT] “ ” to scroll cities.
VI. MY NUMBER This option allows you to see your phone number and S/W version. My Phone Number To see your phone number, press “Memu (‥ )”, “6: My Phone Number” and “1: My Number”. Then your phone number will appear on the display. S/W version To see your phone number, press “Memu (‥ )”, “6: My Phone Number” and “2: S/W version”. Then your phone number will appear on the display.
MESSAGE SERVICES Your phone can receive two types of message service – text messages and voice mail – and you can send a text message (SMS : Short Messaging Service) if these services are available from your service provider. If you subscribe to either or both services, callers can leave you text messages or voice mail. Your service provider then transmits the text messages and voice mail notifications to your phone. I.
- If you want to call, press “SEND” again. Or if you want to save sender’s number, press “SAVE (‥ )”. Send Text Message (SMS : Short Messaging Service) You can send a text message through your phone. To edit and send a text message; - Press “ ” key and “2: Send MSG”. Then old message lists appear on the display below “▶ New MSG”. - Select “▶ New MSG” to create a new message or old messages you sent before.
- Choose “1. Inbox” to erase all messages you received or “2. Outbox” to erase all messages you sent. - Then “Erase ?” appears on the display. Press [OK] (‥ ) to erase the messages. Note ) If you use “Erase All” option, it also erases voice mails. II. Voice Mail Service Your phone can receive voice mail notification when it is turned ON. If your service provider transmits the notification and your phone is turned OFF, you will receive notification the next time you turn your phone ON.
Delete Messages You can delete a message one by one or delete all messages at once. To delete a message; - Press [DEL] ( - Or press “ - Choose “1. Inbox” to erase all messages you received including text messages. - Then “Erase ?” appears on the display. Press [OK] (‥ ) to erase all messages. III. ) key while you are reading a message or on the message list display. ” key and “5: Erase All”.
USING MEMU During a Call Sending My Phone Number You can send your phone number during a call. To send your phone number; - Press “Menu (‥ )” and “1: Send My #”. - Then your phone will dial your phone number automatically and you can hear the dial tone. Storing a Phone Number You can store a phone number and a name during a call. To store a phone number; - Press “Menu (‥ )” and “2: Phone # Memo”.
To see my phone number, press “Menu (‥ )” and “5: My number”. And press “PREV ( )” to go back to previous display. Earpiece Volume Control To increase or decrease Earpiece volume, press “Menu (‥ )” and “6: Call Vol.”. Then you can increase and decrease by scrolling “◀ ▶ ” Voice Privacy To set “Voice Privacy”, press “Menu (‥ )” and “7: Voice Privacy”. Choose “Voice Privacy” as “Enhanced” or “Standard”.
ENTERING LETTERS & NUMBERS You can enter letters, as well as numbers, when storing numbers and names into your phone or sending a text message (SMS : Short Messaging Service) by using your phone’s keypad. To enter letters, press the key associated with the letter you wish to enter until it appears on the screen (numbers also appear). When you need to enter letters into your phone, it automatically switches to ABC mode. Once you enter letters, you enter a capital letter. 1.
FCC RF EXPOSURE INFORMATION Read this information before using your handset In August 1996 the Federal Communication Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S and international standards bodies.