User's Manual

26
- Enter the new password again and press “OK (? )” to save.
3. Memory Clear
The Memory Clear option allows you to clear the call list, schedules, and all other stored
information from memory.
- Press “MENU (? )”, “6. Security”, and “3. Memory Clear”.
- Enter the password.
- Choose “1. Call list”, “2. PhoneBook”, “3. Schedule”, “4. Memo”, “5. Alarm” or “6.
All”.
- Choose “Clear” and press “OK (? )” to erase the memory.
4. Initialize
Phone Initialize allows you to reset the phone.
- Press “MENU (? )”, “6. Security”, and “4. Initialize”.
- Enter the password.
- Choose “Yes” and press “OK (? )”. Then your phone display “Initializing”.
- The phone will automatically restart to apply the change.
5. Privacy Information
To stop disclosing private information to other people, set the phone to show the information
only when the correct PIN has been entered. To set privacy information:
- Press “MENU (? )”, “6. Security”, and “5. Privacy Info”.
- Enter the password.
- Choose “1. Phonebook”, “2. Schedule/Memo”, “3. Message”, “4. Call List” .
- Choose between “On” and “Off” and press “OK (? )” to set.
VII. VALUE ADDED SERVICE (VAS)
1. Data Service
Your phone is capable of receiving digital data when connected to a computing device (such as
laptop, desktop, hand held, palmtop, etc) running Windows NT, Windows 95 or later using the
optional data kit. The phone functions just like a typical modem on your PC.
You may need to set the data transmission mode by manual. If you are in typical CDMA 1X
network, you are required not to change. To change the service mode, press “Menu”, “7. VAS”,
“1. Data Service” . And choose “1. User Name”, “2. Password” and press “SEL (? )”.