•••••••••••••••••••••••••••••••••••••••••••• MICS-XC 4.1 Programming Record Use with MICS-XC 4.1 software A separate programming record is provided for MICS 4.
Contents Installed equipment 2 Programming overview (Profiles 1 and 4) 3 Programming overview (Profiles 2 and 3) 7 Installed telephones and other devices 10 Profile 11 Dialpad 11 Startup 11 Terminals&Sets 11 Line Access 11 Capabilities 12 Name 13 User prefernces 13 Button prgrming 14 User speed dial 17 Restrictions 18 Restrn filters 18 Set restrns 20 Line/set restrns 20 Telco features 20 CLASS assignmnt 20 1stDisplay 20 Called ID 21 Log space 21 Lines 22 Trunk/Line Data 22 P0902615 Issue 03 MICS-XC 4.
ii If Target Line 22 If T1 and Groundstart 22 If T1 and Loopstart 23 If T1 and E&M 24 If T1 and DID 25 If BRI-2 or BRI-ST (ISDN) 26 If BRI-U2 or BRI-U4 (ISDN) 26 If PRI (ISDN) 27 If T1 and Fixed 27 Name 27 Restrictions 28 Line restrns 28 Remote restrns 28 Telco features 28 Services 29 Ringing Service 29 Restrn service 30 Routing service 31 If PRI-A or PRI-B 32 If service type requires service id 32 If Protocol is SL-1 or TIE service type 32 Transparent dialing plan 33 Dest codes 34 Priv DN len 36 Dial time
iii Time&Date 41 System prgrming 42 Hunt groups 42 Change DNs 42 Featr settings 43 Direct-dial 43 CAP assignment 44 Access codes 44 Remote access 45 Change DN type 46 Companion 47 Registration 47 Radios and Cells 48 System LID 49 Recd # length 49 DN length 49 National length 49 Make / Break 49 Business name 49 CbC limits 49 Release reasons 49 Hospitality 50 Telco features 50 VMSg ctr tel#s 50 ONN blocking 50 Software keys 51 SysID 51 Companion ID 51 Password keys 51 Password keys for Companion 51 Password
iv Cards on KSU 52 If card is a Loop card 52 If card is a T1 card 52 If card is a PRI card 53 If card is a DID card 53 If card is an E&M card 53 If card is a BRI-U2, BRI-U4 or BRI-ST card 54 If card is a BRI-2 or BRI-ST card 55 Modules 56 StnMod 56 ASM 56 TrunkMod 57 DataMod 58 IDM 200 58 BayStack 58 SDI 58 Maintenance 61 System version 61 Sys test log 62 Sys Admin Log 63 Network evt log 64 Template specific defaults 65 Terminals&Sets defaults 65 Line Access 65 Telco features (CLASS assignmnt) 65 Lines def
1 Customer/Company Supplier Address Customer service representative Telephone Telephone Billing number Installer System coordinator Installation date All defaults (for the PBX template) are shown in bold and underlined text. Copying set programming You can use COPY to copy programming from one telephone to other set, a range of sets or all the sets.
2 Installed equipment 0X32 ICS Quantity Telephones Equipment Quantity Integrated Communication System (ICS) MICS-XC 4.
Programming overview (Profiles 1 and 4) ATA ans timer Profile PROF 1 Q, Z:0 Startup Template PBX Start DN 221 Off site Msglndicate None 221 Model Button prgrming User speed dial Call log optns M7208 Dialing optns Standard dial Language Display cntrst Ring type Show set:_ Show line:_ Unassigned (If it is a DID line) L001 1 L001: PRI-A LinePool access LinePool PRI-A N Prime line Intercom keys Answer DNs I/C 2 Show set:_ 222 Unassigned OLI# OLI as calld # None N Capabilities Fwd
4 Pub DN lengths Services Prfx: Deflt Prfx:011 Ringing service Ring grp 01 Show set:_ Assigned Unassign Sched: Night Service Off Trunk answer Y ExtraDial 221 Show line:_ 001 N Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Off Sched:Evening Sched:Lunch Sched:Sched 4 Sched:Sched 5 Sched:Sched 6 Routes Show route:_ no numbr DialOut Use: PoolA...
5 Remote page N 01 N LinePool access PRI-A PRI-B Pool A (9) Pool B ( ) Remote page N N Y N N Rem line access Show line:_ L001 Rem pkg 00 Change DN type Hospitality Card type Room/desk info 637 Portable Y Call restrns Vacant: Use flt:__ Basic: Mid: Full: 00 Registration Registration N Portable DNs Availble Radio data Re-evaluation Cell assignment Show radio: Unassigned Antenna type Show radio: Internal Cells Cell radios Show radio: Unassigned 00 DSX1 bld 00 Line coding 00 00
6 Network evt log Provisioning Tests CSU stats Diagnostic tools Link status Usage Metrics Hunt groups Call by call MICS-XC 4.
Programming overview (Profiles 2 and 3) Name Profile PROF 1 Dialpad Q, Z:0 Startup 221 Show line:_ (If it is a Non-DID line) Unassigned L001 1 LinePool A Y LinePool access Prime line Intercom keys Answer DNs I/C 2 Show set:_ Unassigned OLI# None Capabilities Fwd to Forward delay Fwd to 1 Set restrns Normal Night Evening Lunch Sched 4 Sched 5 Sched 6 02 11 12 13 00 00 00 Set lock None Allow last no Y Allow saved no Y Allow link Y Show line:_ 4 Normal Night Evening Lunch Sched 4
8 Sched: Night Service Trunk answer ExtraDial Off Y 221 Line settings Show line:_ Ring grp Aux.
9 Cell nghbrs Show nghbr: Show Module:_ Unassigned Cell rad nghbrs ShowRadNghbr: Unassigned System LID: Cards on KSU Cd1-KSU Card type Loop Loop Lines Recd # length 3 Discon timer 460 Usage Metrics Hunt groups Call by call (If T1 card) DN length 3 10 40 / 60 BusName None CO fail Text: None 2 T1A-547A ISDN Framing ESF CSU line bld Hospitality 460 I/F levels Internal CSU Release reasons DSX1 bld Line coding Clock Src On 0 000-100 B8ZS Primary (If DID card) Profile 3 only Room/de
10 To record additional information, photocopy this page before using. Installed telephones and other devices Name or location Telephone model BLF CAP ATA Port No. Default DN (max. 7 digits) New DN a (max. 7 digits) a. Change DNs in System prgrming; Change DNs. Record old and new DNs here. MICS-XC 4.
11 Photocopy pages before using. Profile Profile PROF 1 PROF 2 Q, Z:0 Q, Z:7,9 PROF 3 PROF 4 Dialpad Dialpad Startup Template Start DN DID PBX __________________________ 221 Terminals&Sets Line Access (Terminals&Sets: Line access) Sets: (max. 7 digits) Line assignment List 3 digit line number and circle line assignment.
12 Line pool access PRI-A PRI-B ABCDE FGHIJ KLMNO PRI-A PRI-B ABCDE FGHIJ KLMNO PRI-A PRI-B ABCDE FGHIJ KLMNO PRI-A PRI-B ABCDE FGHIJ KLMNO PRI-A PRI-B ABCDE FGHIJ KLMNO PRI-A PRI-B ABCDE FGHIJ KLMNO PRI-A PRI-B ABCDE FGHIJ KLMNO Prime Line None I/C Line # __ Pool ____ None I/C Line # __ Pool ____ None I/C Line # __ Pool ____ None I/C Line # __ Pool ____ None I/C Line # __ Pool ____ None I/C Line # __ Pool ____ None I/C Line # __ Pool ____ Intercom Keys 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
13 Redirect ring Y ATA settings ATA ans timer 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 On site Off site On site Off site On site Off site On site Off site On site Off site On site Off site On site Off site None Tone Lamp None Tone Lamp None Tone Lamp None Tone Lamp None Tone Lamp None Tone Lamp None Tone Lamp 221 _________ 221 _________ 221 _________ 221 _________ 221 _________ 221 _________ M7324 M7310 M7208 M7100 CAP ATA Intl set M7324 M7310 M7208 M7100
14 Button prgrming M7100 Prgrming B01 M7208 Default Last No. Prgrming Default B01 Grp Pickup B02 Transfer B03 Last No. B04 Page Genrl B05 Conf/Trans B06 Speed Dial B07 Intercom B08 Intercom M7324 Prgrming Default B01 No default B02 No default B03 No default B04 No default B05 No default B06 No default B07 No default B08 No default B09 No default B10 No default B11 No default B12 No default B13 Call Fwd B14 Speed Dial B15 Last No. B16 Saved No.
15 M7310 Prgrming Default B01 DND B02 Transfer B03 Call Fwd B04 Grp Pickup B05 Page Grnr B06 Conf/Trans B07 Last No.
16 B09 No default B10 No default B11 No default B12 No default B13 No default B14 No default B15 No default B16 No default B17 No default B18 No default B19 No default B20 No default B21 No default B22 No default B23 No default B24 No default B25 No default B26 No default B27 No default B28 No default B29 No default B30 No default B31 No default B32 No default B33 No default B34 No default B35 No default B36 No default B37 No default B38 No default
17 User speed dial (Terminals&Sets: User speed dial) Spd# Speed dial number (max. 24 digits) (71-94) P0902615 Issue 03 Use prime line Use line: ____ Pool code ____ Use routing tabl MICS-XC 4.
18 Restrictions (Terminals&Sets: Restrictions) Restrn filters (Terminals&Sets: Restrictions; Restrn filters) Restrn flt Restrn (Number) 00 Default Overrides (Value) (Number) (Value) 001 1800 002 1877 003 1888 001 911 No restrictions (only filter that cannot be changed) 01 02-99 MICS-XC 4.
19 Restrn filters - continued (Terminals&Sets: Restrictions; Restrn filters) Restrn flt Restrn nn (01-99) P0902615 Issue 03 # (2digits) Restriction (max. 15 digits) Override # (3 digits) Overrides (max. 16 digits) MICS-XC 4.
20 Set restrns (Terminals&Sets; Restrictions; Set restrns) Sets: (max. 7 digits) names (max. 7 char.
21 Called ID (Terminals&Sets;Telco features;Called ID) Y Y N N Y N Y N Y N Y N Y N Log space (Terminals&Sets;Telco features; Log space) Log: Log: Log space (Log:0 Pool: 600) Pool: Pool: P0902615 Issue 03 Log: Pool: Log: Pool: Log: Pool: Log: Pool: Log: Pool: Log: Pool: MICS-XC 4.
22 Photocopy pages before using.
23 If T1 and Loopstart (Digital and Analog) Line no.
24 If T1 and E&M Line no.
25 If T1 and DID (Profiles 1, 3 and 4 only) Line no.
26 If BRI-2 or BRI-ST (ISDN) (BRI-2 for Profiles 2 and 3 only) Line no. (3 digits) Telephone number (supplied by the central office) Trunk type BRI-2 BRI-ST Line type Public Private to: _______ Pool _____ PrimeSet 221 CLID Set None Auto privacy Y N Y N Y N Y N Ans mode (Trunk mode is always super) Manual Auto Manual Auto Manual Auto Manual Auto Ans with DISA (Only if Ans mode is Auto) Y N Y N Y N Y N Aux.
27 If PRI (ISDN) (Profiles 1 and 4 only) Line no. (3 digits) Telephone number (supplied by the central office) PRI PRI PRI Trunk type PRI Line type PRI-A PRI-B PRI-A PRI-B PRI-A PRI-B PRI-A PRI-B PrimeSet 221 None 221 None 221 None 221 None If T1 and Fixed (Profile 1 only) Line no.
28 Restrictions Not available for Target lines. Restriction filter tables are provided under Terminals&Sets.
29 Photocopy pages before using. Services Ringing Service (Services; Ringing Service) (Maximum of 30 sets for each Ringing group) Ring grp: Ring grp: Ring grp: 221 221 221 Ring grp: Ring grp: Ring grp: 221 221 221 Ring grp: Ring grp: Ring grp: 221 221 221 P0902615 Issue 03 MICS-XC 4.
30 Ringing Service (Services; Ringing Service) (continued) Schedule 1 2 3 4 5 Ctrl set: 221 Service Off Manual Trunk answer Y Line settings Line: Aux. ringer: Y ExtraDial 221 Schedule 1 Ctrl set: 221 Service Off Manual Trunk answer Y Line settings Line: Aux. ringer: Y ExtraDial 221 Auto N Ring grp: N 2 3 4 5 Auto N Ring grp: N 6 Schedule 1 2 Ctrl set: 221 Service Off Manual Trunk answer Y Line settings Line: Aux.
31 Routing service (Services; Routing service) Route # DialOut (if required) (001-999) (max.
32 If PRI-A or PRI-B (Services; Routing service) (Profiles 1 and 4 only) Protocol: Srvctype: NI-2 Public Tie FX OUTWATS DMS100 FX 800 DMS250 FX 800 900 AT&T 4ESS 800 I800 900 SDS If service type requires service id (Services; Routing service) (Profiles 1 and 4 only) ServiceID: None If Protocol is SL-1 or TIE service type (Services; Routing service) (Profiles 1 and 4 only) Private DN type: Public MICS-XC 4.
33 Transparent dialing plan (Services; Routing service) Systems in network P0902615 Issue 03 Start DN End DN Networks to systems: Connected by line pool: Line pool access code (if required) MICS-XC 4.
34 Dest codes (Services; Routing service; Dest codes) Service Normal Rte Schedule name (max. 7 char) _______________ DstCode (max.
35 Dest codes (continued) Service Schedule name (max. 7 char) DstCode (max.
36 Priv DN len (Services; Routing service; Priv DN len) (Profiles 1 and 4 only) Priv DN length 3 4 5 6 7 8 9 10 Dial timeout (Services; Routing service; Dial timeout) (Profiles 1 and 4 only) Dial timeout 3 4 5 6 8 10 15 Carrier codes (Services; Routing service; Carrier codes) (Profiles 1 and 4 only) Prefix DN length (digits) 10 3 101 4 Pub DN lengths (Services; Routing service; Pub DN lengths) (Profiles 1 and 4 only) Prefix DN length (digits) Default (Cannot remove) 7 0 11 00 12 01 17 011 18
37 Common settings (Services; Common settings) Control sets (Services; Common settings; Control sets) For line Line: _ _ _ Line: _ _ _ Line: _ _ _ Line: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Line: _ _ _ Line: _ _ _ Line: _ _ _ Line: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ For sets Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _ (for more than 24 sets, enter a range of sets or photocopy this ta
38 Sys speed dial Speed dial #: (01-70) Number to dial (max. 24 digits) MICS-XC 4.1 Programming Record Use prime line Pool code:___ Use routing tabl:___ Use Line: ___ Display digits Name (max. 16 char.
39 Passwords COS pswds (Passwords; COS pswds) Pswd # Assigned to (00-99) (owner of password) P0902615 Issue 03 Password (6 digits) User filter (2 digits) Line filter (2 digits) Remote pkg (00-15) MICS-XC 4.
40 Call log paswds (Passwords; Call log pswds) Set: Log pswd Set: Log pswd Set: Log pswd ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________ ____________________
41 Progrming pswds (Passwords; Progrming pswds) Installer 266344 CONFIG Sys Coord+ 727587 SCPLUS Sys Coord 23646 ADMIN Basic 22742 BASIC 72346 RADIO 4677 HOSP Reg. pswd (Passwords; Reg. pswd) Reg. password Hospitality (Passwords; Hospitality) Desk pswd Cond pwsd None Time&Date Hour: Minutes: 01 P0902615 Issue 03 Year: 00 Month: 99 Day: 01 01 MICS-XC 4.
42 Photocopy pages before using.
43 Featr settings (System prgrming; Featr settings) Background music Y N On hold Tones Receiver volume Use sys volume Camp timeout 30 45 60 90 120 150 180 300 600 Part timeout 30 45 60 90 120 150 180 300 600 Park mode Lowest Cycle Trnsfr callbk 3 5 DRT to prime Y DRT delay 1 Held reminder Y Remind delay 30 Directed pickup Y N Page tone Y N Page Timeout 15 Daylight time Y N AutoTime&Date Y N Music 4 Silence Use set volume 6 12 N 2 3 6 4 10 N 60
44 CAP assignment (System prgrming; CAP assignment) Allows lines to be assigned to the CAP module.
45 Remote access (System prgrming; Remote access) Remote access Pkg # Line pool access (Note that Line Pool access PRI-A and PRI-B are applicable to Profiles 1 and 4 only.
46 Change DN type (System prgrming; Change DN type) DN Type DN Type DN Type ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable ISDN Portable
47 Companion Registration (Companion; Registration) Unavail appears only on USA-MICS-XC 4.1).
48 Radios and Cells (System prgrming; Companion; Radios and System prgrming; Companion;Cells) Base Station / RPI units TCM KSU block device type* equipment location port: number (identify with number or description‡ n RPI wiring KSU block number TCM (if used) Antenna Power source 0__01 0__02 0__03 0__04 0__05 0__06 Base Station Internal External 0__07 Base Station Internal External 0__08 Base Station Internal External 0__09 Base Station Internal External 0__10 Base Station Internal
49 System LID (System prgrming; Companion; System LID) ____________________________________ Recd # length (System prgrming; Rec’d # length) 2 3 4 Recd # length 5 6 7 4 5 6 7 2 3 4 5 DN length (System prgrming; DN length) 2 3 DN length National length (System prgrming; Nat’nl length) 0 1 Natnl length 6 7 8 9 10 Make / Break (System prgrming;Mk / Br) (Profiles 2 and 3 only) Mk / Br 40 / 60 30 / 70 Business name (System prgrming; BusName) BusName: ____________________________________
50 Photocopy pages before using. Hospitality (System prgrming; Hospitality) Room/desk info Sets: (max.
51 Software keys (Used to activate Companion, ISDN PRI, and fixed access trunks/WAN access for Data Modules.
52 Hardware Cards on KSU (Profiles 1 and 4 only) Cd1-KSU Cd2-KSU (Profiles 2 and 3 only) Cd1-KSU Cd2-KSU Loop T1 PRI BRI-ST BRI-U2 BRI-U4 Loop T1 PRI BRI-ST BRI-U2 BRI-U4 Loop T1 BRI-2 BRI-ST Loop T1 BRI-2 BRI-ST 100 260 460 600 If card is a Loop card Card type Loop Lines Discon timer 60 If card is a T1 card Card type T1 Lines Discon timer 60 100 260 460 600 Answer timer 1 2 3 4 5 CO fail TR62411 T1A-547A I/F levels ISDN PSTN Framing SF ESF Internal CSU
53 If card is a PRI card (Profiles 1 and 4 only) Card type PRI Lines Protocol protcl (Not shown if only one protocol available) BchanSeq (Default is Descend unless SL-1 Master) NI-2 DMS100 Ascend DMS250 4ESS SL-1 Descend CbC Routing FX (Only shown for: NI-2, DMS-100, and DMS-250) None All Map table 800 (Only shown for: NI-2, DMS-100, DMS-250, and 4ESS) None All Map table 800 (Only shown for: 4ESS) None All Map table 900 (Only shown for: DMS-250, and 4ESS) None All Map table SDS (O
54 If card is a BRI-U2, BRI-U4 or BRI-ST card (for Profiles 1 and 4 only) BRI-_____ Card type Loops Loop Type Type S (If BRI-U2 or BRI-U4 default is NT) T LT NT Protocol (Not shown if only one protocol available) Sampling (Shown for S loop type only) Adaptve Fixed For S & LT only (for Profiles 1 and 4 only) Assign DNs Show DN:__ Assigned Loop DN:_ Availabl *LP___* LP___ ISDN DN None For T & NT only (for Profiles 1 and 4 only) SPID__ # of B-channls 1 2 Network DNs DN1: Call type Voice Data
55 TEIs (0-63) ClockSrc (On core only) Primary Secndry ONN blk SuprsBit SrvcCode TimMstr If card is a BRI-2 or BRI-ST card (for Profiles 2 and 3 only) Card type BRI-_____ Loops Loop Type Type S T For S (for Profiles 2 and 3 only) Sampling Adaptve Fixed Assign DNs Show DN:__ Assigned Availabl Loop DN:_ None ISDN DN *LP___* LP___ For T (for Profiles 2 and 3 only) ClockSrc Primary (On core only) Ovlap recving Y Public digit length 1 P0902615 Issue 03 Secndry TimMstr N 2 3 4 5 6
56 Modules (for Profile 1 only) Mod 03 StnMod ASM DataMod TrunkMod Mod 04 StnMod ASM DataMod TrunkMod Mod 05 StnMod ASM DataMod TrunkMod Mod 06 StnMod ASM DataMod TrunkMod Mod 07 StnMod ASM DataMod TrunkMod Mod 08 StnMod ASM DataMod TrunkMod Mod 09 StnMod ASM DataMod Mod 10 StnMod ASM DataMod Mod 11 StnMod ASM DataMod Mod 12 StnMod ASM DataMod Mod 13 (For use by StnMod DataMod Mod 14 (For use by Companion or the DM only) StnMod DataMod Companion or the DM
57 TrunkMod (Profiles 1 and 4 only) (BRI cards are available on Modules 03 and 04 on midi systems, and on Modules 07 and 08 for maxi or mega systems.) (TrunkMod cannot be configured for Modules 09-14.
58 TrunkMod (Profiles 3 ) (BRI cards are available on Modules 03 and 04 on midi systems, and on Modules 07 and 08 for maxi systems.
59 TxClk src: Auto TxClk invrsn On Off Data invrsn: On Off Lp state: Lpbk Off man DTE P0902615 Issue 03 DTE DCE man DS30 auto DTE MICS-XC 4.
60 Fixed Access Type: Data Module ____ IDM200 SDI Data Module ____ BayStack IDM200 SDI BayStack Interface ___ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Interface ___ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line ____ Channel ____ Line
61 Maintenance System version (Maintenance; System version) System Version SP: Port/DN Status Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: Device: P0902615 Issue 03 MICS-XC 4.
62 Sys test log (Maintenance; Sys test log) Sys Test Log Log item Time of log item Number of repetitions Time and date that log was checked MICS-XC 4.
63 Sys Admin Log (Maintenance; Sys Admin Log) Sys Admin Log Log item Time of log item Number of repetitions Time and date that log was checked P0902615 Issue 03 MICS-XC 4.
64 Network evt log (Maintenance; Network evt log) Network Log Log item Time of log item Number of repetitions Time and date that log was checked MICS-XC 4.
65 Template specific defaults For the Norstar MICS-XC 4.1 system, the PBX template is the default template. The PBX default values are used throughout the entire Programming Record. The DID template is also available as an option at startup. The following charts show the sections of the Programming Record where the DID template default values differ from the PBX template default values.
66 Trunk/Line data (Digital and Analog DID) Setting DID Line type Lines Pool 001 to 024: Pool A 025 to 048: Public 049 to 336: Public Trunk/Line data (BRI-2, BRI-ST, BRI-U2 and BRI-U4 lines) Setting DID Line type Lines Pool 001 to 024: Pool A 025 to 048: Public 049 to 336: Public MICS-XC 4.
67 Glossary of programming headings and settings The dots next to each heading in this glossary, represent the programming hierarchy in the Norstar Modular ICS. Profile Select the Profile. Dialpad Select the Dialpad layout. Startup Template Select the template to assign the default values for the system. Start DN Enter the DN of the first telephone. The Start DN must be between 3 and 7 digits in length. The default DN length and default Received number length are also defined by the Start DN.
68 Handsfree Select whether Handsfree will be available to a telephone. HF answerback Select whether a user can automatically answer a voice call without lifting the receiver or pressing the Handsfree/Mute button. It is always turned off for an M7100 telephone. Pickup grp Select one of nine pickup groups to assign this telephone to. Any user in a pickup group can answer calls to any other telephone in their group using the Call Pickup - group feature (ÄàÞ).
69 Ring type Select a ring type. Restrictions Lets you create and assign restriction filters which prevent a user from making certain kinds of calls from a telephone. Set restrns Select restrictions for specific set or all sets. Filters Normal Night For each line, enter the number (two-digit) of the restriction filter to apply during normal service and each of the schedules.
70 1stDisplay Select call information to be displayed first: name of caller, number of caller, or name of line in your Norstar system that the call is on. Called ID Select if Called ID is to be displayed. Log space Allocate a number of Call log spaces from a system-wide pool of spaces to the telephone. Log: Assign this telephone its log spaces. Pool: Lines A programming section that lets you assign settings to each trunk and external line.
71 Signal Select the signal type for an E&M or DID line to match the signal type programmed for the trunk at the other switch. ANI number Select whether the telephone number of the caller will be collected for this E&M or DID line. The digits can then be displayed on Norstar telephones as part of Call Information services. DNIS number Select whether the digits dialed by an external caller on this E&M or DID line will be collected.
72 Services A programming section that lets you create services such as night ringing, routing and restrictions for making external calls. Ringing service Assign additional telephones to ring for a line during specified periods of the day or night. Ringing groups Allow groups of extended ringing sets to be defined. Show group:_ Enter the number of the Ringing group you want to program (001-100). Ring grp 001 Enter the valid ring group number from 001 to 100.
73 Use Select the line pool you want this route to use. Dest codes Define which routes are used when a destination code is dialed. Show DstCode:_ Up to 500 destination codes are programmable. Enter the digits (up to 7 digits) of the destination code that you want to define a route. No two destination codes can be identical. A destination code cannot begin with a digit assigned as the Call Park prefix, or a Direct-dial digit.
74 Assign a control telephone to each telephone. This telephone controls Restriction service and Routing service for the set. Schedule names The schedule name is shown on the display of the control telephone when the schedule is turned on. It identifies the active schedule. Sched 1 Enter the name of the schedule, or use the default numbering.
75 COS pswd #00 Indicates the number of the password to which you are assigning information. Pswd 00 Enter a six-digit password. User flt Assign a restriction filter to the Class of Service password. Line flt Select whether a Class of Service password will use the default line filter or a different line filter (enter the two-digit filter number).
76 Name: Enter the name of the hunt group. Change DNs Change the DN of a telephone. All DNs must be the same length. The first digit of a new DN cannot be the same as the external line access code, the Call Park prefix, the Direct-dial digit, or the first digit of a line pool access code. If you change an individual DN, you must quit programming for the change to take effect. If you have additional programming to do, quit and then begin a new programming session.
77 Anskey: Allows you to assign up to eight answer keys. Settings are Basic, Enhanced, and Extended. Direct-dial Select whether an internal or external number is used for the Direct-dial telephone. D-Dial 1 Enter the internal or external numbers that the system will automatically dial when someone enters the Direct-dial digit. Intrnl# Enter the DN number of the direct-dial telephone. If it is an external number, you will also have to choose how the outgoing call is made.
78 Remote access pkgs Create packages to apply to lines that allow or restrict the remote access to Norstar line pools and/or to paging. Show pkg:_ Enter the two-digit remote package number (00-15). Package 00 is pre-set to allow no access. LinePool access For each package, select whether the user will have access to your systems line pools. Pool For each line pool, select whether a remote user can have access.
79 Recd # length Select the number of digits received on auto-answer lines. These digits are used to identify the Auto DN and DISA DNs, and to route calls to target lines. DN length:_ Select the length of DNs. DN length can be three to seven digits. Each increase in DN length adds the digit 2 to an existing DN (for example: DN 344, increased to five digits becomes 22344). Natnl length The length of the telephone number dialed to reach a person within the same country.
80 Attn duration The period programmed in seconds for which a set alerts on each alarm attempt. Telco features This programming section lets you assign settings for external voice messaging services. VMsg ctr tel#s Allows you to enter the telephone numbers of the voice message centers. VMsg center 1 You can enter numbers for up to five voice message centers. VMsg center 2 VMsg center 3 VMsg center 4 VMsg center 5 Tel# Enter the telephone number (up to 24 digits) to store.
81 CO fail Select the carrier failure standard used by your T1 service provider. This setting only appears for DTIs. I/F levels Interface levels defaults to the ISDN loss plan setting. Find out if your Norstar system is connected to a central office (CO) with digital network loss treatment (ISDN I/F levels) or analog network loss treatment (PSTN I/F levels) by checking with your telecommunications service provider.
82 Cd2 on KSU Select the type of card that occupies the second slot in the ICS (The slots are numbered from left to right). If your system is using 4x8 software which has not been upgraded, this setting does not appear. Mod 03 View and program the cards installed in the modules.
83 Lp state Shows you the direction of the loopback, if any, generated by the SDI. Fixed access Allows you to assign Fixed lines to supported data modules (IDM 200, BayStack or SDI). Maintenance This programming section lets you make diagnostic checks on the system. System version Record the system version shown on the display after entering the maintenance section. Port/DN status View the Port/DN status. Module status View the Module status.
84 MICS-XC 4.
Meridian, Norstar, and Companion are trademarks of Nortel Networks Corporation. Meridian Norstar Business Communication System is manufactured by Nortel Networks Corporation. This document is for use with Norstar Modular ICS 4.1.