Installation guide

1
P0902615 Issue 03 MICS-XC 4.1 Programming Record
All defaults (for the PBX template) are shown in bold and underlined text.
Copying set programming
You can use COPY to copy programming from one telephone to other set, a range of sets or all the sets. Depending on where the display
button is pressed, you will copy either all the programming for a telephone or only the programming found under one of the individual sub-
headings.
For general set copying, you can choose what part of the programming will be used. The choices are:

System

the system administration programming (system data) of a set

System + User

the system administration programming PLUS the programming for a particular set (user data), with the following
exceptions:
Customer/Company Supplier
Address Customer service representative
Telephone
Telephone
Billing number Installer
System coordinator Installation date
System Data which will be copied:
Line access
Line assignment
Answer DNs (unless Answer button DN is same as set being copied to)
Line pool access
Prime line designation
Number of intercom keys
Restrictions
Line/set restrictions
Set restrictions
Set Lock
Allow Last Number Redial
Allow Saved Number Redial
Allow Link
Capabilities
Allow Redirect
Call Forward No Answer (DN or Route + number + delay)
Call Forward Busy (DN or Route + number)
Redirect Ring
Auxiliary Ringer
DND on Busy
Hotline
Handsfree Answerback
Handsfree Setting
Direct-dial (which set is reached by
the D-Dial digit)
Pickup Group
Paging
Paging Zone
Priority call
SLR redirection
Receive tones
ATA ans timer
MsgIndicate (for ATA)
Telco Features
Call log set (
Logging set
)
1stDisplay
System data which will NOT be copied:
Line access
Private line appearances
Capabilities
Set Name
Telco features
Log space
Passwords
Call log password
CAP assignment
Direct-dial set designation
ExtraDial set designation
Service mode ringing set designation
Prime set designation for a line
Hunt group appearances
User data which will be copied:
Language choice
Ring type
Calls log options (
Auto logging)
Display contrast
Dialing options (automatic, predial,
standard)
User data which will be copied if
destination set type is the same as the
source set type:
External autodial button assignments
Internal autodial button assignments
Programmable button assignments
User data which will NOT be copied:
CAP module memory button assignments
Ring volume
User speed dial entries