Installation guide

80
MICS-XC 4.1 Programming Record P0902615 Issue 03
 Attn duration
The period programmed in seconds for which a set alerts on each alarm attempt.
Telco features
This programming section lets you assign settings for external voice messaging services.
 VMsg ctr tel#s
Allows you to enter the telephone numbers of the voice message centers.
 VMsg center 1
 VMsg center 2
 VMsg center 3
 VMsg center 4
 VMsg center 5
You can enter numbers for up to five voice message centers.
 Tel#
Enter the telephone number (up to 24 digits) to store.
 ONN blocking
Allows outgoing name and number to be blocked at the called party end on both analog and
digital lines.
 Analog VSC
Analog Vertical service code.
 Tone
Vertical service code for analog tone dialing trunks.
 Pulse
Vertical service code for analog pulse dialing trunks.
 BRI VSC
Basic Rate Interface Vertical service code.
 Code:
Software keys
In this section, you can activate optional features and services through Northern Telecom.
 SysID
This number can be viewed on any M7324 or M7310 telephone display. Record the number,
which you will be asked to provide when you call the Nortel Customer Response Center.
 Password keys
Keys are required for some system expansion activities and to activate the remote monitoring
capability. To obtain the required Software keys for Companion, call the Nortel Customer
Response Center at: 1-800-321-2649. To obtain the required keys for ISDN PRI, and fixed
access trunks/WAN access for Data Modules, call the Nortel Customer Response Center at: 1-
800-684-5825.
 Key 1
Enter the eight-digit password.
 Key 2
Enter the eight-digit password.
 Key 3
Enter the eight-digit password.
Hardware
In this section, you can view and configure the Trunk Cartridges and BRI Cards installed in the
ICS.
 Show module:_
Indicate the module you wish to view.
 Cards on KSU
View and program the cartridges and cards installed in the ICS.
 Cd1-KSU
View the type of card that occupies the right-most slot in the ICS.
 Card type
The display shows the current card type.
 Lines
View the line-number range for the lines on a Trunk Cartridge.
 Discon timer
Specify the duration of an Open Switch Interval for a Trunk Cartridge.
 Answer timer
Select the minimum duration, in seconds, of an answer signal before a call is considered to be
answered, for an E&M trunk cartridge.