Specifications

Installation /
19
P0992639 01 Modular ICS Companion Installer Guide
RPI unit
There are two versions of the RPI unit: the RPI-8 BIX UL,
which supports up to eight base stations; and the RPI-16 BIX
UL, which supports up to 16 base stations. Each RPI has a
connection board and either one (RPI-8 BIX UL) or two (RPI-
16 BIX UL) power supply units (PSUs). The maximum input
power consumption of an RPI is 240 W. If a UPS 48 V DC
backup source is used, the maximum input power requirement
of the RPI is 140 W.
You can upgrade an RPI-8 BIX UL to an RPI-16 BIX UL by
installing a second PSU to the RPI-8 BIX UL. Refer to
Upgrading an RPI-8 to an RPI-16 on page 119.
If RPIs are distributed throughout the site, the number and type
of RPIs depend on the placement and powering plan of the
base stations.
To determine how many base stations and how many PSUs
you need for the number of base stations, use the following
table: