Specifications

/ Registering individual portables

Modular ICS Companion Installer Guide P0992639 01

To register the C3060

1. Turn on registration for your system.

2. Press m ***. The display shows ADMINISTRATION

and three softkeys, SYS, PINFO, DATA.

3. Press SYS. The display shows WIRELESS SYSTEMS.

Note: Wireless Systems is a registration list of names for up

to six different systems. If the list is full, and you must

add another system, de-register an existing system

name.

4. Press ADD to establish a radio link. The display briefly

shows Adding SYSTEM: (next system number). If ADD,

not available, start over at step 1 again.

The display shows Pswd: for an established radio link.

The display shows No connection for a radio link not

established.

5. Enter the registration password. The default password is

72346 (RADIO). The display shows DN:.

The display shows Invld Pswd for a wrong password.

6. Enter the three-digit Directory Number (DN) between 637

and 696. The display shows Enter name.

The display shows Invld DN when the DN is wrong.

The display shows Reg failed when the registration fails.

If you try to register the C3060 to the same system twice,

the display shows the registered name. For example

Registered as NORTEL 1.