Specifications

Registering individual portables /

P0992639 01 Modular ICS Companion Installer Guide

• the radio IDs of all other base stations in the same location

1. Follow steps 1 to 5 of Measuring undirected RSSI on page

77.

If the display shows the ID of a base station neighboring

the one you want to measure, proceed to step 2.

If the display shows the ID of the base station you want to

measure, move out of the cell boundary range so that hand-

off occurs and then continue with step 2. To end the

undirected RSSI connection, press k.

2. Press m. The display shows MENU.

3. Press ,

. until the display shows Feature

request.

4. Press SELCT . The display shows Feature: .

5. Press 8 9 9.

6. Enter the five-digit ID code for the base station radio you

want to measure. This mode displays the radio ID of the

base station to which the portable is linked, followed by

the signal strength and power mode. For example, 14112

- 67.

Hand-off does not occur as you move between the cell

boundaries. The link drops when you move out of range.

Note: In this example, the module is 14, the port is 11 and the

radio is 2. The signal strength measured by the base

station is -67 dBm.

7. To end the connection, press k.