Installation guide

4-6 Basic system procedures
Enabling and disabling the console and AML data ports
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Disabling the console and the AML data ports
For Release 18
systems and later
Use these procedures if the software running on your Meridian 1
switch is Release 18 or later.
Enabling the console and the AML data ports
Step Action
1 Log on to the Meridian 1 PBX. (Refer to “Logging on to
the Meridian 1 PBX” on page 4-3.)
2 At the
>
prompt, enter the following:
LD 37
<Return>.
DIS TTY 8
<Return> to disable the console’s data port.
3 At the LSL TTY (Y/N) prompt, enter Y.
4 Enter * * * *
.
5 At the
>
prompt, enter the following:
LD 48
<Return>.
DIS ESDI 9
<Return> to disable the link on port 9.
6 Enter * * * *
.
Step Action
1 Log on to the Meridian 1 PBX. (Refer to “Logging on to
the Meridian 1 PBX” on page 4-3.)
2 At the
>
prompt, enter the following:
LD 48
<Return>.
ENL AML 9 ACMS
<Return> to establish the link on port
9.
3 Enter * * * * .