Installation guide

5-20 Troubleshooting and maintenance
Maintaining the external tape drive
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Cleaning the tape head
Sensor holes
Cotton
swab
Tape head
g100003
8 Discard the used swab and repeat steps 5 and 6 with
new swabs until the swab shows no signs of dirt.
9 Use a new dry swab to remove any remaining cleaning
fluid from the head.
10 Push the head loading lever away from the load position.
11 If there was a tape cartridge in the tape drive, replace it.
12 If the power to the tape drive was on at the start of this
procedure, turn it back on.