Installation guide

8-4 Networked systems
The RSM breakout assembly
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
The RSM breakout assembly
Introduction
For the Enhanced Card Option, see to “Installing the RSM
breakout assembly” on page 1-11 for the RSM breakout
assembly installation instructions. For the Meridian Mail Mini,
see “Installing the RSM package” on page 1-49.
As seen in “Networked system cables—Enhanced Card option”
on page 8-5 and “Networked system cables—Meridian Mail
Mini” on page 8-6, you can run one of two voice cables from
the RSM breakout assembly—a male to male or a male to bare
wire. The male-to-male voice cable connects the RSM breakout
assembly to a BIX Pack. The male-to-bare wire voice cable
must be wired to a BIX or similar modular distribution frame
according to the instructions in “Wiring for networked systems”
on page 8-6.
In “Wiring for networked systems” on page 8-6, the columns on
the left are for the wires from the MDF cable, and the columns
on the right are for the male DB-25 cable that connects to the
modem. Before you attach this cable to the modem, however,
the modem must be correctly configured.