Installation guide

ACCESS systems 9-5
Hardware installation
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Hardware installation
Introduction
The Option 11C ACCESS Hardware Kit contains the following
items:
1 RSM breakout assembly (NTAK18BA)
1 25-pair MDF voice cable, 3.1 m (10 ft), male-to-male
(NE-B25C-FS) or
25-pair MDF voice cable, 3.1 m (10 ft), male-to-bare wire
(NE-A25C-FS)
1 DB-25 peripheral cable, 3.1 m (10 ft), male-to-bare wire
(NTAK37AA) or
DB25 peripheral cables, 3.1 m (10 ft), female-to-bare wire
(NTAK36AA)
The Option 11C Mini ACCESS Hardware Kit contains the
following items:
1 RSM breakout assembly (NTTK40AA)
1 RSM cable (NTTK44AA)
1 25-pair MDF voice cable, 3.1 m (10 ft), male to male
(NE-B25C-FS) or
25-pair MDF voice cable, 3.1 m (10 ft), male to bare wire
(NE-A25C-FS)
1 DB25 peripheral cable, 3.1 m (10 ft), male to bare wire
(NTAK37AA) or
DB25 peripheral cables, 3.1 m (10 ft), female to bare wire
(NTAK36AA)
“ACCESS system cables—Enhanced Card Option” on page 9-8
and “ACCESS system cables—Meridian Mail Mini” on page
9-9 show the basic cabling plan for ACCESS systems. The
cables you require depend on which BIX system you are using
and on the interface on the workstation.
Note: If your workstation has a DB-9 interface, you require a
DB-9 to DB-25 adapter. This part is not supplied by Nortel
Networks.