Installation guide

9-6 ACCESS systems
Hardware installation
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
The RSM breakout
assembly
For the Enhanced Card Option, see “Installing the RSM
breakout assembly” on page 1-11 for the RSM breakout
assembly installation instructions. For the Meridian Mail Mini,
see“Installing the RSM package” on page 1-49.
As seen in “ACCESS system cables—Enhanced Card Option”
on page 9-8 and “ACCESS system cables—Meridian Mail
Mini” on page 9-9, you can run one of two voice cables from
the RSM breakout assembly— a male-to-male or a male-to-bare
wire. The male-to-male voice cable connects the RSM breakout
assembly to a BIX Pack. The male-to-bare wire voice cable
must be wired to a BIX or similar modular distribution frame
according to the instructions in the tables on the following
pages.
The UNIX workstation
The instructions you use to wire the UNIX workstation depend
on how the workstation is configured. Refer to the product
documentation.
For DTE configurations, use “Wiring for DTE UNIX systems”
on page 9-9.
In each table, the columns on the left are for the wires from the
MDF cable, and the columns on the right are for the cable to the
UNIX workstation.