Installation guide

Meridian Mail defaults 10-7
Networked and ACCESS systems
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Option 11 switches come with these hardware locations
correctly configured. If you need to completely redefine a
hardware location, respond to the following prompts in Overlay
11. (Refer to “Changing a hardware location” on page 4-26.)
Note: A problem may occur (no voice prompt) if you redefine a
routing address to other than the default value.
Hardware location
parameters for
Overlay 11
Second
(bottom)
daughterboard
Channel 4
10 11 5-2-2 10 11 7000 7807 7837 ALL
Card
Option 11
routing
address
(c u)
Mail
port
location
Routing
address
Primary
DN
Channel
DN
(SCN)
Position
ID
Types of
service
Prompt Response Comment
KEY 0 ACD
xxxx K yyyy xxxx
is the new Voice Messaging DN
and
yyyy
is the position ID for the
hardware location. K is only for RLS
22 and later.
K
is the CLID entry
number required.
KEY 1 SCN
zzzz zzzz
is the channel DN for the
hardware location.
KEY 2 MSB
KEY 3 NRD
KEY 5 RLS
KEY 6 TRN
KEY 7 AO3 O is the letter O.
KEY 4 RLS Key 4 is utilized for RLS on Option 11
because there is no key 9 on the
2008 set that is used for the Meridian
Mail voice port.