Installation guide

Terminal configuration 11-3
NT220 terminals
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
NT220 terminals
Introduction
“NT220 setup values” on page 11-4 contains the setup
parameters for NT220 terminals.
Setting up the
NT220 terminals
To set up an NT220 terminal, follow these steps.
Step Action
1 Turn on the terminal.
2 Select Setup to enter setup mode.
The current setup parameters appear on a series of
screens.
3 Use the following procedures to change the values on
each screen to match the parameters in
“NT220 setup values” on page 11-4:
To move through the setup screens:
a. Use the arrow keys to move to
To Next Setup Screen
and press <Return>.
To change the parameter in a field:
a. Use the arrow keys to move to that field.
b. Press <Return> to move through the available
parameters for that field.
4 When you are finished, select Setup again.