Installation guide

Terminal configuration 11-9
VT220, VT320, and VT420 terminals
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
VT220, VT320, and VT420 terminals
Introduction
“VT220 setup values” on page 11-10 contains the setup values
for VT220 terminals. “VT320 setup values” on page 11-11
contains the setup values for VT320 terminals. “VT420 setup
values” on page 11-12 contains the setup values for VT420
terminals.
Setting up the
VT220, VT320, and
VT420 terminals
The setup procedure is the same for all three terminals.
Step Action
1 Turn on the terminal.
2 Select Setup to enter setup mode.
The current setup values appear on a series of screens
as the user scrolls through them.
3 Use the following procedures to change the parameters
on each screen to match the values in the appropriate
table:
To move to a particular screen from the main setup
screen:
a. Use the arrow keys to move through the menu of
setup screens and press <Return>.
To move to the next setup screen:
a. Use the arrow keys to move to
To Next Setup
and
press <Return>.
To change the parameter in a field:
a. Use the arrow keys to move to that field.
b. Press <Return> to move through the available
parameters for that field.
4 When you are finished, select Setup again.