Installation guide

Terminal configuration 11-13
VT520 terminals
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
VT520 terminals
Introduction
Refer to “VT520 setup values” on page 11-15 for the setup
values for VT520 terminals.
Setting up the
VT520 terminal
To set up a VT520 terminal, follow these steps.
Step Action
1 Select Setup to enter setup mode.
The Main Set-Up window appears as shown below.
2 Use the up and down arrow keys to highlight the setup
feature that is to be changed (for example, Actions).
3 When the setup feature is highlighted, use one of the
following methods to select the appropriate settings:
Actions
Session
Display
Terminal type
ASCII emulation
Keyboard
Communication
Modem
Printer
Tabs . . .
Set-Up language
On-line
Save settings
Restore settings
Exit Set-Up
IF THEN
a solid triangle ( )
appears beside the
setup feature
use the right arrow key to
automatically display the pop-up
window of associated settings. See
“VT520 terminal—sample feature
pop-up window” on page 11-14 for
an example.