Installation guide

Hardware installation 1-7
Required and optional hardware for the Enhanced Card Option 11C
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Required and optional hardware for the Enhanced Card
Option 11C
Required hardware
The basic Meridian Mail hardware for Enhanced Card
Option 11C consists of the following:
1 Meridian Mail Enhanced Processor Card
(NT6R16AA)
up to 2 DSP daughterboards
1 Seagate ST34520N 4.5 Gbyte disk drive (mounted on
the CPU card)
The Meridian Mail Enhanced Processor Card is in slot MM1.
Optional hardware
The following hardware is optional:
• External Archive tape drive kit and SCSI cable, North
America (NT6P05BA)
• External Tandberg tape drive kit and SCSI cable, North
America (NTAK30DA/A0639203)
• External tape drive kit and SCSI cable, United Kingdom
(NTAK30EA/A0639205)
• External tape drive kit and SCSI cable, European Mainland
(NTAK30AA)
Note: Each tape drive kit comes with a power cord
appropriate to its location.
• Tape drive wall mounting kit for either Archive or
Tandberg drives (NTAK39AA)
• 3M brand DC6250 tapes (A0368760) for system backups
• Nortel Networks Personal Printer (C2501287)
• RSM breakout assembly with enhanced EMI protection
(NTAK18BA)
• Hospitality Voice Services (HVS) Hardware Kit, including
RSM breakout assembly (NTAK35AA)
• Networking Hardware Kit, including RSM breakout
assembly (NTAK40AA)
• ACCESS hardware, including RSM breakout assembly
(Refer to “The RSM breakout assembly” on page 9-6.)