Installation guide

Hardware installation 1-23
Installing the external tape drive
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Mounting the external tape drive
Inserting a tape
To insert a tape into the tape drive, follow these steps.
With the top of
the tape drive
facing the wall,
slide it into the
bracket.
Affix the second
bracket to the wall with
its lips overlapping the
front of the tape drive.
Affix the first bracket to the
wall with its lips to the left.
CARD-017
Step Action
1 Position tapes with the label side to the top of the tape
drive and the opening towards the front of the drive.
Note:
This applies to Viper tape drives only. If the tape
drive has been mounted correctly on the wall, insert
tapes with the label facing the wall and the opening
facing upwards.
2 Insert the tape in the appropriate tape drive as described
in the table that follows.