Installation guide

Hardware installation 1-27
Installing a printer
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Connecting and
configuring the LA75
Plus Companion
printer
To connect and configure the LA75 Plus Companion printer,
follow these steps.
Step Action
1 Connect the printer to the appropriate port at the rear of
the system administrator’s terminal using the following
cables:
For VT220 terminals
Connect the printer to the
H87575-A adapter using a BC16E-10 cable, and connect
the adapter to the port labeled PR using an A0369499
cable.
For VT320, VT420, and VT520 terminals
Connect the
printer to the port labeled Printer Port using a BC16E-10
cable.
For NT220 terminals
Connect the printer to the
H87575-A adapter using a BC16E-10 cable, and connect
the adapter to the port labeled Auxiliary using an
NTND82AA/AB cable.
For HP700/22 terminals
Connect the printer to the port
labeled Printer using an A0369499 cable.
For HP700/32 terminals
Connect the printer to the
H87575-A adapter using a BC16E-10 cable, and connect
the adapter to the port labeled Port 2 using an A0369499
cable.
2 Plug the printer’s AC power cord into an appropriate
outlet, and turn on the power. There is no need for it to be
on the same circuit as the Meridian 1 cabinet.
3 Verify that the printer is turned off.
4 Press and hold the setup button on the front control
panel of the printer and, at the same time, power on the
printer.