Installation guide

1-28 Hardware installation
Installing a printer
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
The LA75 Plus Companion printer control panel
LA75 Plus Companion printer default settings
CARD-080
←
↑
→
↓
Ready
Set-up
RDY
Serial Port
Fault Quiet
LQ
Quiet/
Quality
Protocol DEC FFLF
5 Release the setup button one to two seconds after
powering on.
The printer prints a list of the default settings. When the
list is complete, it goes back to the beginning of the list,
reprints the first setting, and stops. (Refer to “LA75 Plus
Companion printer default settings” on page 1-28.
Additional settings are all defaults.)
Feature
number Name
Value
number Name
Generic 1 Protocol at powerup 3 Port dependent
Generic 2 Form length 9 27.94 cm
(11 inches) (A)
Generic 3 Vertical pitch 4 6 lines per 2.54 cm
(inch)
Generic 4 Automatic advances 1 Selected
Generic 5 Print quality control 1 Software control
Generic 6 Port selection 1 Serial port
Generic 7 Baud rate 7 9600
Generic 8 Data bits and parity 7 8-none
Generic 9 Buffer control 1 XON/XOFF
Generic 10 Error beep 1 One beep
Generic 11 Typestyle 1 Internal
Generic 12 Input buffer size 1 8K
Generic 13 Disconnect on fault 1 Not selected
DEC 1 Horizontal pitch 7 10 Char. per 2.54
cm (in.) (80 Col)
DEC 2 GO character pitch 1 US ASCII
DEC 3 User pref. char. set 1 DEC Supplemental
DEC 4 Printer ID 4 Conf. Level 2 (LA75
Plus)
DEC 5 Text mode right
margin
2Wrap