Installation guide

1-32 Hardware installation
Installing a printer
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Setting the printer to
auto print mode
To set the printer to auto print mode, follow these steps.
3 Plug the printer’s AC adapter into an appropriate outlet.
There is no need for it to be on the same circuit as the
Meridian 1 cabinet.
4 Plug the adapter’s power cord into the socket at the back
of the printer.
5 Turn the power on.
6 To enable the printer, press the button immediately below
the power indicator lamp as shown in “Enabling the HP
ThinkJet printer” on page 1-33.
7 For more information, consult the printer’s owner’s
manual.
Step Action
1 Select Setup on the administration terminal to display the
Setup screen.
2 Press <Return> to display the Printer Communication
Setup screen.
3 Use the down arrow cursor key to move to the
Printer
Speed
field.
4 Press <Return> to change the speed field to 9600.
5 Use the down arrow cursor key to move to the
Print
mode
field.
6 Press <Return> to change to
Auto print mode
. This
selection sets the printer to print everything
automatically; otherwise, messages only appear on the
terminal.
7 Press Setup to exit.