Installation guide

Hardware installation 1-47
Connecting the SCSI tape drive cable
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Connecting the SCSI tape drive cable
Introduction
Next, connect the SCSI tape drive cable (NTTK12AA) to the
Meridian Mail Enhanced Processor Card (NT6R16AA).
The SCSI connector is located behind the faceplate of the
Meridian Mail Enhanced Processor Card and is not visible from
the front. In this procedure, you set up an easy access for
Meridian Mail Mini to a tape drive.
The Mail mounting bracket (P0903798) has a 4.4 cm (1.75
inch) cutout in its bend radius area, behind where the SCSI
cable mounts to the bracket. This cutout neatly contains the
excess ribbon cable as it passes through.
Note: This loop of ribbon cable provides a service loop for the
Meridian Mail Enhanced Processor Card. Because of this cable,
you can extract the card whenever necessary without disturbing
the cable assemblies associated with the mounting bracket.
Note: You can install the Meridian Mail hardware while the
Meridian 1 PBX is running.
G101499
SCSI Tape Drive Cable (NTTK12AA)Mail Card
Option 11C Mini Chassis Expander
Bracket
(to loop cable)
Cutout (to let
Tape Drive
cable out)