Installation guide

1-48 Hardware installation
Connecting the SCSI tape drive cable
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
Connecting the SCSI
tape drive cable
To connect the SCSI tape drive cable, follow these steps.
Step Action
1 Attach one end of the SCSI tape drive cable
(NTTK12AA) to the SCSI connector on the Meridian Mail
Enhanced Processor Card (NT6R16AA).
2 Dress the ribbon cable along the back of the faceplate,
and exit at the end of the faceplate.
3 Insert the Meridian Mail Enhanced Processor Card back
into the chassis.
4 Remove the Mail bracket (P0903798) from the fan baffle
of the Option 11C Mini chassis assembly by removing
the two mounting screws.
5 Attach the remaining end of the SCSI tape drive cable to
the Mail bracket using the two mounting screws
provided.
Note:
Orient the connector so that the cable of the mating
external tape drive cable travels down and to the right, to
exit from the Option 11C Mini chassis through the bottom
cutout in the chassis.
6 Attach the mating tape drive cable to the SCSI cable and
Mail bracket assembly.
7 Mount the Mail bracket back in the chassis assembly.
8 Dress the excess ribbon cable of the SCSI cable to the
right and back toward the bracket.
9 Push the Meridian Mail Enhanced Processor Card all the
way to the back of the chassis, and use the latch levers
to insert the card into the backplane.