Installation guide

System installation and modification 2-11
Using the System Installation and Modification menu
Standard 2.0 Meridian Mail Mini and Enhanced Card Option May 2000
Installation and Maintenance Guide
• Enhanced Card Option systems have only one node and a
maximum of 12 hardware locations.
• Multimedia ports require two consecutive hardware
locations.
• You cannot assign more multimedia ports or full-service
voice ports than you have purchased, nor can the total
number of ports exceed the number determined by the
keycode, whether or not you have the hardware you need.
• Each multimedia port uses a single full-service port in your
allocation.
The following procedure allows you to change the attributes of
a range of hardware locations:
Changing attributes of
hardware locations
To change the attributes of hardware locations, follow these
steps.
Step Action
1 At the Select operation: prompt, choose Change.
2For
Port Type,
choose the attributes you want for the
range of hardware locations: Basic Voice, Full-service
Voice, or Full-service Multimedia.
3For
First Node,
choose 1.
4For
First Location
, choose the first hardware location in
the range.
5For
Last Node,
choose 1.
6For
Last Location
, choose the last hardware location in
the range.
The list of hardware locations appears again to reflect
the changes.
7 At the prompt,
Is this correct?
proceed as follows:
a. Choose Yes to implement the changes.
If you have exceeded any of the limits to the number
or type of ports, you are prompted to change the
allocation.
or
b. Choose No to enter more changes.