Installation guide

Programming the Meridian Companion system Page 93 of 206
Meridian Companion Installation and Maintenance Guide
7. Press OK . The display shows Re-enter: .
If you do not enter any digits and press OK
, the display shows
Pswd not changed .
8. Reenter the digits and press OK
. The display shows Password changed.
If the display shows Pswd not changed, you did not enter the same
password again. Go back to step 5.
9. Record the new Installer password in Meridian Companion
Programming and Provisioning Record.
10. Press ® to exit or press * to continue in Configuration
programming.
Changing the Administration password
The one- to six-digit Administration password gives a system administrator
access to Administration programming. The default password is
···· .
1. Press ƒ••· . The display shows Password: .
2. Enter the Administration password. The display shows
1. Registration .
3. Press * until the display shows 4. Passwords .
4. Press ^ . The display shows Admin. password .
5. Press CHANGE
. The display shows New pswd: .
ATTENTION!
You should change the Administration password after the
system is installed to protect the integrity of the settings.
To prevent unauthorized access, provide the Administration
password only to selected personnel.