Installation guide

Programming the Meridian Companion system Page 95 of 206
Meridian Companion Installation and Maintenance Guide
1. Press ƒ••· . The display shows Pa s sw o rd : .
2. Enter the Administration password. The display shows
1. Registration .
3. Press * until the display shows 4. Passwords .
4. Press ^ . The display shows Admin. password .
5. Press * . The display shows Reg. password .
6. Press CHANGE . The display shows New pswd: .
7. Enter a new one- to six-digit Registration password. Use BKSP
for
corrections.
8. Press OK
. The display shows Re-enter: .
Note: If you do not enter any digits and press OK
, the display shows
Pswd not changed .
9. Reenter the digits and press OK
. The display shows
Password changed .
If the display shows Pswd not changed , you did not enter the same
password again. Go back to step 6.
10. Record the new Registration password in Meridian Companion
Programming and Provisioning Record.
11. Press ® to exit or press * to continue in Administration
programming.