Installation guide

Page 106 of 206 Configuring the Meridian 1 for the Meridian Companion system
553-3601-220 Standard 4.00 November 1998
If package 240 is not enabled, the WRLS prompt does not appear.
CNDA/CNDD and MCRA/MCRD cannot be accepted as values for CLS, and
an error message appears. (LD 83, available with X11 release 20B, prints a list
of wireless sets.)
There is one exception to the package 240 requirement: if package 131 is on,
MCRA/MCRD is an acceptable CLS value. If the package is not on, use the
steps described in “X11 release 15 or greater without package 240” on
page 104 to program the Meridian Companion portable telephones.
See Table 15 for the prompts and responses in LD 10 that apply to Meridian
Companion. The defaults appear in parentheses and new prompts are bolded
in Table 16.
Table 16 : LD 10—X11 release 20B or greater with package 240: Configuring a WTN for
a portable
Prompt Response Meaning
REQ NEW new telephone
TYPE 500 telephone type
TN l s c u (Opt. 21-81)
I u (Opt. 11)
terminal number
CDEN 4D quadruple density
DES CT2+ ODAS telephone number
CUST 0–99 customer number
WRLS YES/(NO)
indicates that the TN corresponds to a portable
telephone; CLID is enabled as a default
DN xxx…x directory number assigned to the portable
CLS
CNDA/(CNDD)
user can see the name associated with the number
dialed if CPND is set up for the customer
CLS
MCRA/(MCRD)
Multiple Call Arrangement Allowed
(privacy)/Multiple Call Arrangement Denied (no
privacy)
CLS (DTN) digital signaling used by portable telephone (this is
the default only if WRLS = YES)