Installation guide

Page 120 of 206 Registering and verifying portable telephones
553-3601-220 Standard 4.00 November 1998
To register the portables you perform the following:
• Enable registration for the Meridian Companion system and ensure there
are sufficient credits.
• Register the portables.
• Verify the operation of each portable.
• Disable registration for the Meridian Companion system.
Enabling and disabling registration
You must enable registration for the entire Meridian Companion system to
allow individual portables to register. The options are Yes (
Y
) and No (
N
). Yes
indicates that Master Registration is enabled. No is the default and indicates
that Master Registration is not enabled.
Note: To prevent interference problems with neighboring systems, set the
Master Registration to
N
when the portables are no longer being
registered.
1. Press ƒ••· and enter the Administration password. The
display shows 1. Registration .
2. Press ^ . The display shows Mstr Reg Enbl: followed by the
currently set Master Registration setting, Y or N .
3. To change to the other setting, press CHANGE
.
4. To continue in Administration programming, press * , or to
exit, press ® to exit.
Locking Registration on (optional)
Mstr Reg Enbl: automatically returns to N 30 minutes after the last
registration. It is recommended that you allow Registration to time out in most
circumstances. Leaving Registration enabled can interfere with registration in
neighboring systems. However, if you are registering a large number of
portables and do not want registration to time out, you can lock it on.
1. On the Administration Terminal, press ƒ••· . The
display shows Password: .