Installation guide

Maintenance Page 135 of 206
Meridian Companion Installation and Maintenance Guide
The Event/Alarm log indicates what alarms and events occurred, when they
occurred, and how many times they occurred.
Entering the Event/Alarm log
1. Press ƒ••‚ and enter the Installer password.
2. From A. Configuration, press * until the display shows
C. Maintenance .
3. Press ^ , then press * until the display shows
5. Evnt/Alrm Log .
4. Press ^ . The display shows Start of new log or
Start of log .
5. Press * or & to search through alarms and events in
the log.
6. Press % twice to continue in Maintenance programming.
Checking the most recent alarm
1. Enter the Event/Alarm log.
2. Press ALARM
. The display shows an alarm code if there is an uncleared
alarm, or No current alarm .
3. Press EXIT
to return to the Event/Alarm log, or press OK if an alarm
message was displayed.
Checking when an alarm or event occurred
1. Enter the Event/Alarm log.
2. Press * or & to search through the alarms and events
in the log.
3. Press
TIME . The display shows the date and time that the alarm or event
last occurred, then returns to the alarm.