Installation guide

Maintenance Page 145 of 206
Meridian Companion Installation and Maintenance Guide
g. Press CHANGE to select AM or PM.
4. To schedule the date, press * . The display shows Date
followed by the current scheduled date (today’s date if none scheduled).
If you do not want to change the scheduled date, press % four
times to continue in Configuration programming. (You may hear a beep
after the first % .)
To continue scheduling the date
a. Press CHANGE
. The display shows Year: followed by the currently
scheduled year. If you do not want to change the year, go to step 4d.
b. Press CHANGE
. The display shows Year: .
c. Enter the last two digits of the year.
d. Press * . The display shows Month: followed by the
current scheduled month. If you do not want to change the month, go
to step 4g.
e. Press CHANGE
. The display shows Month: .
f. Enter the month as one or two digits between 1 and 12.
g. Press * . The display shows Day: followed by the current
scheduled day. If you do not want to change the day, go to step 5.
h. Press CHANGE
. The display shows Day: .
i. Enter the day of the month as one or two digits between 1 and 31.
5. Press % three times to continue in Configuration programming.
(You may hear a beep after the second % .)
Replacing equipment
Adding or moving Base Stations
There are two reasons to add or move a Base Station.
• to correct deployment problems such as holes in a coverage area or not
enough Base Stations to handle traffic in a given cell
• to facilitate system growth which will mean an increase in the coverage
area or traffic