Installation guide

Installing the hardware Page 13 of 206
Meridian Companion Installation and Maintenance Guide
• Position Base Stations away from where a portable is used in an office
area by at least the amount shown in Table 1. Installing the Base Stations
on ceilings or high on walls helps to maintain these minimum distances.
• If powering with plug-top power, position the Base Station within 4 m
of an AC outlet, since the plug-top power supply has a 4-metre cord.
Keep these points in mind:
— the power supply must be located in an area accessible to a properly
grounded AC outlet
— the input plug is part of the power supply (the only way to remove
power is to disconnect the power supply)
— if you must install a new AC outlet to accommodate the power
supply, ensure that the AC outlet is mounted with sufficient
clearance to plug the power supply
— if more than one Base Station is installed at a cell center, ensure that
each plug-top power supply has a separate AC outlet
Powering a Base Station
Base Stations can be powered by plug-top power supplies or remote power
interconnect units. See “Installing remote power interconnect units” or
“Mounting a Base Station plug-top power supply” for your configuration.
Table 1 : Minimum distance between office areas and Base Stations
Number of Base Stations
in the cell
Minimum distance between
office areas and Base Stations
11 m
21.4 m
31.8 m
42 m