Installation guide

Installing the hardware Page 29 of 206
Meridian Companion Installation and Maintenance Guide
route the pairs to the output connectors. If only one pair is used for
powering a Base Station, connect the power pair to -PWR(1) and
+PWR(1). If two pairs are used to power a Base Station, connect one pair
to -PWR(1) and +PWR(1), and the second pair to -PWR(2) and
+PWR(2).
WARNING!
Ensure both power pairs have the same
polarity.
Connecting two power pairs with opposing
polarities may damage the Base Station
and RPI.